Table of Contents
Advertisement
In the Setting tab, the current binding setting will be shown.
When Projector binding is checked, the projector binding function is enabled.
The ID of the bound projector will appear in the box below Projector binding, as
shown above.
After unchecking Projector binding, Bind Projector in the right-click menu will be
gray, and you cannot bind any projector.
To prevent the quick projecting confirmation window from appearing, check Don't
show the quick projecting dialog, in the Setting tab.
If you want to disable the binding projector function or quick projection function,
please uncheck the Projector binding, then click OK.
Remote controller emulation
Remote controller emulation has the same functions as a remote controller. For
example, you can use the remote emulation controller to open the projector menu,
configure the projector, and turn off the projector with it.
The Remote controller emulation item can only be shown on the system tray menu
on the bottom right corner of the desktop, when the projector is in wireless
projecting status. Right-click the Lenovo Wireless Projector system tray icon, and
select Emulation remote controller to open the controller panel, as shown below.
3-6
C400 Wireless Projector: User's Guide
Advertisement
Table of Contents
