Adjusting the projector level and height
To adjust the projector level and height, complete the following procedure:
1. To raise the height of the projector, lift the projector 1 and press the
2. To make minor adjustments to the height, rotate the elevator foot.
3. To lower the level of the projector, press the height-adjuster button and press
Note:
Adjusting the image
To adjust the zoom, focus, and keystone for the image, do the following:
Table 2-1. (continued)
Projection distance
Image height
1
2
(m/ft)
(zoom max/min)
6.0 m/19.68 ft
2.6 m/2.2 m
101.9 in./85.0 in.
10.0 m/32.8 ft
4.3 m/3.6 m
170.1 in/141.7 in.
height-adjuster buttons 2 . The elevator foot 3 drops down.
down on the top of the projector.
v The projector table or stand should be level and sturdy.
v Position the projector so that it is perpendicular to the screen.
v Be sure the cables are not in a place where they can knock over the
projector.
Image Width
Diagonal image size
3
4
(zoom max/min)
(zoom max/min)
3.5 m/2.9 m
4.3 m/3.6 m
135.8 in./113.4 in.
170.1 in./141.7 in.
5.8 m/4.8 m
7.2 m/6.0 m
226.8 in./188.9 in.
283.5 in./236.2 in.
Chapter 2. Setting up the projector
2-5