Telecommuters Sharing One Vpn Rule Example; Telecommuters Using Unique Vpn Rules Example; Figure 59 Telecommuters Sharing One Vpn Rule Example; Table 48 Telecommuters Sharing One Vpn Rule Example - ZyXEL Communications ZyWall P1 User Manual

9.11.1 Telecommuters Sharing One VPN Rule Example

See the following figure and table for an example configuration that allows multiple
telecommuters (A, B and C in the figure) to use one VPN rule to simultaneously access a
ZyWALL at headquarters (HQ in the figure). The telecommuters do not have domain names
mapped to the WAN IP addresses of their IPSec routers. The telecommuters must all use the
same IPSec parameters but the local IP addresses (or ranges of addresses) should not overlap.

Figure 59 Telecommuters Sharing One VPN Rule Example

Table 48 Telecommuters Sharing One VPN Rule Example

FIELDS
My IP Address:
Secure Gateway IP
Address:
Local IP Address:
Remote IP Address:

9.11.2 Telecommuters Using Unique VPN Rules Example

In this example the telecommuters (A, B and C in the figure) use IPSec routers with domain
names that are mapped to their dynamic WAN IP addresses (use Dynamic DNS to do this).
With aggressive negotiation mode (see
ID types and contents to distinguish between VPN rules. Telecommuters can each use a
separate VPN rule to simultaneously access a ZyWALL at headquarters. They can use
different IPSec parameters. The local IP addresses (or ranges of addresses) of the rules
configured on the ZyWALL at headquarters can overlap. The local IP addresses of the rules
configured on the telecommuters' IPSec routers should not overlap.
Chapter 9 VPN Screens
HEADQUARTERS
Public static IP address
0.0.0.0 With this IP address only
the telecommuter can initiate the
IPSec tunnel.
192.168.1.10
0.0.0.0 (N/A)
Section 3.3.7.1 on page
ZyWALL P1 User's Guide
TELECOMMUTERS
0.0.0.0 (dynamic IP address
assigned by the ISP)
Public static IP address
Telecommuter A: 192.168.2.12
Telecommuter B: 192.168.3.2
Telecommuter C: 192.168.4.15
192.168.1.10
63), the ZyWALL can use the
147