Telecommuter Vpn/Ipsec Examples; Figure 58 Vpn: Global Setting; Table 47 Vpn: Global Setting - ZyXEL Communications ZyWall P1 User Manual

ZyWALL P1 User's Guide

Figure 58 VPN: Global Setting

The following table describes the labels in this screen.

Table 47 VPN: Global Setting

LABEL
Output Idle Timer
Input Idle Timer
Gateway Domain Name
Update Timers
Apply
Reset

9.11 Telecommuter VPN/IPSec Examples

The following examples show how multiple telecommuters can make VPN connections to a
single ZyWALL at headquarters. The telecommuters use IPSec routers with dynamic WAN IP
addresses. The ZyWALL at headquarters has a static public IP address.
146
DESCRIPTION
Enter the time period (between 30 and 3600 seconds) to wait before the
ZyWALL checks the VPN connection to the remote IPSec router.
When traffic is sent to the remote IPSec route from which no reply is received
after the specified time period, the ZyWALL checks the VPN connectivity. If
the remote IPSec router does not reply with an acknowledgement, the
ZyWALL automatically disconnects the VPN tunnel.
Enter 0 to disable this feature.
Enter the time period (between 30 and 3600 seconds) to wait before the
ZyWALL checks the VPN connection to the remote IPSec router.
When no traffic is sent to and/or received from the remote IPSec router after
the specified time period, the ZyWALL sends checks the VPN connectivity. If
the remote IPSec router does not reply with an acknowledgement, the
ZyWALL automatically disconnects the VPN tunnel.
Enter 0 to diable this feature.
This field is applicable when you enter a domain name to identify the
ZyWALL and/or the remote secure gateway.
Enter the time period (between 30 and 3600 seconds) to wait before the
ZyWALL updates the domain name and IP address mapping through a DNS
server.
Enter 0 to disable this feature.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Chapter 9 VPN Screens