Setting Up; Inserting The Sealing Tape; Adapting The Sealing Tape Reel Holder To The Sealing Tape Reel; Adjusting The Sealing Tape Brake - Pfaff 8303-040 Instruction Manual

9

Setting up

9

Inserting the sealing tape

.01
9

Adapting the sealing tape reel holder to the sealing tape reel

.01.01
2
Fig. 9 - 01
The sealing tape real holder must be adapted to the inner diameter of the sealing tape
reel:
For small inner diameters turn the front disk 1, so that the small disk 2 is positioned
opposite holder 3. The sealing tape reel can be fitted to the holder directly.
For large inner diameters turn the front disk 1, so that the large disk 2 is positioned
opposite holder 3. Slide fitting 4 onto holder 3 and push the sealing tape reel onto it.
9

Adjusting the sealing tape brake

.01.02
Adjust the sealing tape brake with nut 5 so that the sealing tape reel cannot continue
moving, but the sealing tape can be drawn off rapidly.
All setting up work may only be carried out by appropriately trained personnel!
Unless stated otherwise, the machine must be switched off for all setting up
work!
1
4 3
When the sealing tape unwinds it should not touch the inner wall of the sealing
tape reel holder.
5
Fig. 9 - 02
Setting up
9 - 1