Toshiba RAV-SM404SDT-E Service Manual page 197

No. Part name
1. Detachment
Discharge
2
port cabinet
1) Carry out work of 1 of
2) Remove screws for the discharge port
3) Remove screws for the discharge port
4) Remove screws for the discharge cabinet
5) Remove screw for the discharge cabinet
6) Remove screws for the discharge port
Side cabinet 1) Carry out work of 1 of 1 .
3
2) Remove the screws which fix the inverter
3) Remove the screws for the side cabinet
4) Remove screws for the side cabinet and
5) Remove screw for the side cabinet and the
6) Remove screws for the side cabinet and
Procedure
1
cabinet and the partition board.
(ST1T Ø4 × 8, 4 pcs.)
cabinet and the bottom plate.
(Hexagonal screw Ø4 × 10, 2 pcs.)
and the motor base.
(ST1T Ø4 × 8, 2 pcs.)
and the heat exchanger.
(ST1T Ø4 × 8, 1 pc.)
cabinet and the fin guard.
(Hexagonal screw Ø4 × 10, 2 pcs.)
assembly and the side cabinet.
(ST1T Ø4 × 8, 2 pcs.)
and the valve fixing plate.
(ST1T Ø4 × 8, 2 pcs.)
the piping panel (Rear).
(Hexagonal screw Ø4 × 10, 2 pcs.)
bottom plate.
(Hexagonal screw Ø4 × 10, 1 pc.)
the fin guard (Heat exchanger).
(Hexagonal screw Ø4 × 10, 5 pcs.)
.
Heat exchanger
Fin guard
– 197 –
Remarks
Motor base Discharge port cabinet
Partition board
Inverter assembly
Valve fixing plate
Side cabinet