Setting The Time; Standby Mode - Sony HCD-CL1 Service Manual

HCD-CL1/CL3

Setting the time

1
Turn on the system.
2
Press CLOCK/TIMER SET on the
remote.
Proceed to step 5 when you set the clock for
the first time.
3
Turn ./> (or press . or > on
the remote) to select "CLOCK SET?".
4
Press ENTER/YES.
5
Turn ./> (or press . or > on
the remote) to set the hour.
6
Press M (or ENTER/YES on the
remote).
The minute indication flashes.
7
Turn ./> (or press . or > on
the remote) to set the minute.
8
Press ENTER/YES on the remote.
The clock starts working.
If you made a mistake
Press m or M repeatedly until the incorrect
item flashes, then set it again.
To change the preset time
Start over from step 1.
6
Saving the power in

standby mode

Press DISPLAY repeatedly when the
system is off. Each time you press the
button, the system switches cyclically as
follows:
Demonstration t Clock display t Power
Saving Mode
To cancel the Power Saving Mode
Press DISPLAY once to show the
demonstration, twice to show the clock display.
Tip
?/1 indicator lights up even in the Power Saving
Mode.