Superior DRT2033 Installation And Operation Instructions Manual page 54

Innovative Hearth Products
Superior™ DRT2000 and DRC2000 Direct-Vent Gas Fireplaces
Installing the DRT2040 and DRT2045 logs
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log
placement is critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the
flames. Follow the log placement instructions precisely.
NOTE: Do not cover the burner ports.
Table 38: DRT2040 Log Set
1. If necessary, remove the glass door (Page 55).
2. Locate the log placement brackets (Figure 54).
Figure 54: Placing log 1
3. Position rear log (1) on the left rear log bracket (Figure 54)
4. Position the left front log (2) and the right front log (3) against the log rack (Figure 55).
5. Position the left cross log (4) over the rear log (1) and left front log (2) with the front resting on the log rack
Figure 56: Placing log 4
6. Position the right cross log (5) on the right rear log bracket and over right front log (3) (Figure 57).
54
4 1
2
1
Volcanic Stone
Glowing Embers
(Do not place glowing embers over burner slots)
(Figure 56).
4
1
2
Log Number
5
Catalog number for the entire set:
DRT2040: F1830
DRT2045: F1884
3
Figure 55: Placing logs 2 and 3
Right Rear Log Bracket
Log Rack
Figure 57: Placing log 5
1
2
3
4
5
2
Operation
900004-00, 04/2014
Description
Rear Log
Left Front Log
Right Front Log
Left Cross Log
Right Cross Log
3
5
3