Gas Conversion Kits - Superior DRT2033 Installation And Operation Instructions Manual

Innovative Hearth Products
Superior™ DRT2000 and DRC2000 Direct-Vent Gas Fireplaces
Table 32: Listed Secure Flex
H1969
77L87
77L88
77L89
77L90
77L91
91L66
91L67

GAS CONVERSION KITS

This conversion kit shall be installed by a qualified service agency in accordance with the manufacturer's
instructions and all applicable codes and requirements of the authority having jurisdiction. If the
information in these instructions is not followed exactly, a fire, explosion, or the production of carbon
monoxide may result; causing property damage, personal injury, or loss of life. The qualified service agency
is responsible for the proper installation of this kit. The installation is not proper and complete until the
operation of the converted appliance is checked as specified in the manufacturer's instructions supplied with
the kit.The qualified service agency performing this installation assumes responsibility for this conversion.
Cette trousse de conversion doit être installée par un technicien agréé, selon les instructions du fabricant
et selon toutes les exigences et tous les codes pertinents de l'autorité compétente. Assurez-vous de bien
suivre les instructions dans cette notice pour réduire au minimum le risque d'incendie, d'explosion ou la
production de monoxyde de carbone pouvant causer des dommages matériels, des blessures ou la mort.
Le tecnicien agréé est responsable de l'installation de cette trousse. L'installation n'est pas adéquate ni
complète tant que le bon fonctionnement de l'appareil converti n'a pas été vérifié selon les instructions du
fabricant fournies avec la trousse. Le fournisseur de service qualifié ayant réalisé l'installation assume les
responsabilités liées à la conversion.
In Canada:
The conversion shall be carried out in accordance with the requirements of the provincial authorities having
jurisdiction and in accordance with the requirements of the CAN/CGA-B149.1 Installation code.
Gas conversion kits are available to adapt your fireplace from the use of one type of gas to the use of another. These
kits contain all the necessary components needed to complete the task including labeling that must be affixed to
ensure safe operation.
Refer to the instructions provided with the conversion kit when performing any gas conversion.
Table 33: Millivolt Systems,Natural Gas To Propane Gas Conversion Kits
Models
DRC2033 / DRT2033
DRC2035 / DRT2035
DRC2040 / DRT2040
44
DRC2045 / DRT2045
Components
®
Horizontal Square Termination for
SF4.5HT-2
flex (without flex)
Square Term. for flex with
SFKIT12S
12" (305 mm)* compressed flex
Square Term. for flex with
SFKIT18S
18" (457 mm)* compressed flex
Square Term. for flex with
SFKIT24S
24" (610 mm)* compressed flex
Square Term. for flex with
SFKIT36S
36" (914 mm)* compressed flex
Square Term. for flex with
SFKIT48S
48" (1219 mm)* compressed flex
Gear Clamp 4.5" (114 mm) for flex
SFGC4-6
(6-pack)
Gear Clamp 7.5" (190.5 mm) for
SFGC7-6
flex (6 pack)
La conversion devra être effectuée conformément aux recommandations des autorités provinciales ayant
juridiction et conformément aux exigences du code d'installation CAN/CGA-B149.1.
Catalog Number
F1893
F1771
F1772
F1897
*All compressed flex vents can be expanded up to two times.
WARNING
AVERTISSEMENT
Table 34: Millivolt Systems, Propane Gas to Natural Gas Conversion Kits
Models
DRC2033 / DRT2033
DRC2035 / DRT2035
DRC2040 / DRT2040
DRC2045 / DRT2045
Vertical Termination for flex (flat to 6/12)
with flex adaptor, section of rigid vent, roof
56L74 SFVT30
support collar assembly, roof flashing and
storm collar. (see 750052M)
Vertical Termination for flex (6/12 to 12/12)
with flex adaptor, section of rigid vent, roof
56L75 SFVT45
support collar assembly, roof flashing and
storm collar. (see 750052M)
36" Flex Connector Kit.
36" of flex with two adaptors for
H7748 H7748
mating two rigid sections of vent
Catalog Number
F1891
F1769
F1770
F1895
Installation
900004-00, 04/2014
together.