Lenovo THINKSERVER 1008 Hardware Maintenance Manual page 40

Figure 8. Removing a PCI card
Note: The PCI card fits tightly into the card slot. If necessary, alternate moving each side of the PCI
card a small amount until it is removed from the card slot.
5. Remove the new PCI card from its static-protective package.
6. Install the new PCI card into the appropriate slot on the system board. See "System-board internal
connectors" on page 25.
Note: If you are installing a PCI Express x16 card, make sure the memory slot retaining clips are closed
before you install the PCI Express x16 card.
7. Pivot the PCI card latch to the closed position to secure the PCI card.
34
ThinkServerHardware Maintenance Manual