Important Information About Replacing Rohs Compliant Frus - Lenovo THINKSERVER 1008 Hardware Maintenance Manual

Lenovo laptop user manual
Table of Contents

Advertisement

Attention: This server is suitable for use on an IT power distribution system whose maximum phase-to-phase
voltage is 240 V under any distribution fault condition.
Important: This product is not suitable for use with visual display workplace devices according to Clause 2
of the German Ordinance for Work with Visual Display Units.

Important information about replacing RoHS compliant FRUs

RoHS, The Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive
(2002/95/EC) is a European Union legal requirement affecting the global electronics industry. RoHS
requirements must be implemented on Lenovo products placed on the market and sold in the
European Union after June 2006. Products on the market before June 2006 are not required to
have RoHS compliant parts. If the parts are not compliant originally, replacement parts can also
be noncompliant, but in all cases, if the parts are compliant, the replacement parts must also be
compliant.
Note: RoHS and non-RoHS FRU part numbers with the same fit and function are identified with unique
FRU part numbers.
Lenovo plans to transition to RoHS compliance well before the implementation date and expects its suppliers
to be ready to support Lenovo's requirements and schedule in the EU. Products sold in 2005 will contain
some RoHS compliant FRUs. The following statement pertains to these products and any product Lenovo
produces containing RoHS compliant parts.
RoHS compliant ThinkServer TS200v parts have unique FRU part numbers. Before or after June 2006, failed
RoHS compliant parts must always be replaced using RoHS compliant FRUs, so only the FRUs identified as
compliant in the system hardware maintenance manual or direct substitutions for those FRUs can be used.
Products marketed before June 2006
Current or original part
Non-RoHS
Non-RoHS
Non-RoHS
RoHS
Note: A direct substitution is a part with a different FRU part number that is automatically shipped by the
distribution center at the time of order.
Replacement FRU
Can be Non-RoHS
Can be RoHS
Can sub to RoHS
Must be RoHS
Products marketed after June 2006
Current or original part
Must be RoHS
Replacement FRU
Must be RoHS
.
Chapter 1
About this manual
5

Advertisement

Table of Contents
loading

Table of Contents