Lenovo THINKSERVER 1008 Hardware Maintenance Manual

Lenovo laptop user manual
Hide thumbs

Advertisement

Quick Links

Table of Contents
ThinkServer
Hardware Maintenance Manual
ThinkServer TS200v Types 0981, 0992, 1008, and 1010

Advertisement

Table of Contents
loading

  Summary of Contents for Lenovo THINKSERVER 1008

  • Page 1 ThinkServer Hardware Maintenance Manual ThinkServer TS200v Types 0981, 0992, 1008, and 1010...
  • Page 3 ThinkServer Hardware Maintenance Manual ThinkServer TS200v Types 0981, 0992, 1008, and 1010...
  • Page 4 © Copyright Lenovo 2010, . LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure.
  • Page 5: Table Of Contents

    Replacing FRUs ....Removing the server cover ..© Copyright Lenovo 2010, Removing and reinstalling the front bezel . .
  • Page 6 Disposing of Lenovo computer components . Disposing of disused lithium batteries from Lenovo computers ... Index....97 .
  • Page 7: Chapter 1. About This Manual

    If Lenovo® installs a self-service CRU at your request, you will be charged for the installation. • Optional-service customer replaceable unit: You may install an optional-service CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for the server.
  • Page 8: Safety Statements

    Safety statements Important: Each caution and danger statement in this document is labeled with a number. This number is used to cross reference an English-language caution or danger statement with translated versions of the caution or danger statement in the Safety Information document. For example, if a caution statement is labeled "Statement 1,"...
  • Page 9 CAUTION: When replacing the lithium battery, use only a type battery recommended by the manufacturer. If your system has a module containing a lithium battery, replace it only with the same module type made by the same manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of.
  • Page 10 ≥ 18 kg (39.7 lb) ≥ 32 kg (70.5 lb) ≥ 55 kg (121.2 lb) CAUTION: Use safe practices when lifting. Statement 5 CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device.
  • Page 11: Important Information About Replacing Rohs Compliant Frus

    Lenovo plans to transition to RoHS compliance well before the implementation date and expects its suppliers to be ready to support Lenovo's requirements and schedule in the EU. Products sold in 2005 will contain some RoHS compliant FRUs. The following statement pertains to these products and any product Lenovo produces containing RoHS compliant parts.
  • Page 12 ThinkServerHardware Maintenance Manual...
  • Page 13: Chapter 2. General Information

    This chapter provides general information that applies to all machine types supported by this publication. Features and specifications The following information is a summary of the features and specifications of the server. Depending on the server model, some features might not be available, or some specifications might not apply. © Copyright Lenovo 2010,...
  • Page 14 • Use the Setup Utility program to determine the type and speed of the microprocessor. • For a list of supported microprocessors, see http://www.lenovo.com/thinkserver and click the Options tab. Memory • Supports up to four DDR3 ECC UDIMMs (double data rate 3 error...
  • Page 15: Software

    Non-operating: -10° to 60°C (14° to 140°F) (without package) Software Lenovo provides software to help get your server up and running. EasyStartup The ThinkServer EasyStartup program simplifies the process of installing supported Microsoft Windows operating systems and device drivers on your server. The EasyStartup program is provided with your server on DVD.
  • Page 16 ThinkServerHardware Maintenance Manual...
  • Page 17: Chapter 3. General Checkout

    • Machine type and model • Processor or hard disk drive upgrades • Failure symptom – Do diagnostics indicate a failure? – What, when, where, single, or multiple systems? – Is the failure repeatable? – Has this configuration ever worked? © Copyright Lenovo 2010,...
  • Page 18 – If it has been working, what changes were made prior to it failing? – Is this the original reported failure? • Diagnostics version – Type and version level • Hardware configuration – Print (print screen) configuration currently in use –...
  • Page 19: Chapter 4. Diagnostics

    Notes: 1. You can download the PC-Doctor for DOS diagnostic program from http://www.lenovo.com/support. See “PC-Doctor for DOS” on page 13 for detailed information. 2. If you are unable to isolate and repair the problem yourself after running the diagnostic programs, save and print the log files created by the diagnostic programs.
  • Page 20: Running Tests

    • The Enter key is used to select a menu item. • The Esc key is used to back up to the previous menu. • For online help, select F1. Running tests There are four ways to run the diagnostic tests. •...
  • Page 21: Viewing The Test Log

    Quick and Full erase - hard disk drive The diagnostics program offers two hard disk drive formatting utilities: • Quick Erase Hard Drive • Full Erase Hard Drive Quick Erase Hard Drive provides a DOS utility that performs the following: •...
  • Page 22: Power Supply Problems

    Error The start-up drive is not in the boot sequence in configuration. No operating system installed on the boot drive. The boot sector on the start-up drive is corrupted. The drive is defective. Power Supply Problems If you suspect a power problem, use the following procedures. Check/Verify Check the following for proper installation.
  • Page 23: Post Error Codes

    Beep Symptom 1 long and 3 short beeps Keyboard error 1 long and 9 short beeps BIOS ROM error Continuos long beeps DRAM memory error POST error codes Each time you power-on the system, it performs a series of tests that check the operation of the system and some options.
  • Page 24: Easystartup Problems

    POST Error Message HARD DISK INSTALL FAILURE Keyboard error or no keyboard present Memory Test: Memory test fail Press TAB to show POST screen Error: Non-System disk or disk error Replace and press any key when ready EasyStartup problems The following table describes the EasyStartup problems and suggested actions to correct detected problems. Table 2.
  • Page 25: Miscellaneous Error Messages

    Table 2. ThinkServer EasyStartup DVD (continued) • Follow the suggested actions in the order in which they are listed in the Action column until the problem is resolved. • See the Chapter 7 “Parts Listing, TS200v Machine Types 0981, 0992, 1008, and 1010” on page 59 to determine which components are customer replaceable units (CRUs) and which components are field replaceable units (FRUs).
  • Page 26 Message/Symptom "Insert a Diskette" icon appears with a known-good diagnostics diskette in the first 3.5-inch diskette drive. Intensity or color varies from left to right of characters and color bars No power or fan not running Non-system disk or disk error-type message with a known-good diagnostic diskette.
  • Page 27: Undetermined Problems

    Undetermined problems This section provides instructions on how to find out the failing devices or adapters. 1. Turn off the server. 2. Remove or disconnect the following components (if installed) one at a time. a. External devices (modem, printer, or mouse) b.
  • Page 28 ThinkServerHardware Maintenance Manual...
  • Page 29: Chapter 5. Locating Server Controls And Connectors

    Rear connector locations shows the locations of the connectors on the rear of your server. Some connectors on the rear of your server are color-coded to help you determine where to connect the cables in your server. © Copyright Lenovo 2010, Power switch...
  • Page 30 Figure 2. Rear connector locations Power cord connector Serial port VGA monitor connector DisplayPort connector USB connectors (6) Ethernet connector Connector Audio line-in connector Used to receive audio signals from an external audio device, such as a stereo system. When you attach an external audio device, a cable connects the audio line-out connector of the device to the audio line-in connector of the server.
  • Page 31: System-Board Internal Connectors

    Connector USB connector Used to attach a device that requires a USB connector, such as a USB keyboard, a USB mouse, a USB scanner, or a USB printer. If you have more than eight USB devices, you can purchase a USB hub, which you can use to connect additional USB devices.
  • Page 32: Internal Components

    Internal components Figure 4 “Component locations” on page 26 shows the locations of the various components in your server. To remove the server cover and access to the inside of the server, see “Removing the server cover” on page 30. Figure 4.
  • Page 33: Chapter 6. Replacing Frus

    This section contains information for trained service technicians. Inspecting for unsafe conditions Use the information in this section to help you identify potential unsafe conditions in a Lenovo product that you are working on. Each Lenovo product, as it was designed and manufactured, has required safety items to protect users and service technicians from injury.
  • Page 34: Guidelines For Servicing Electrical Equipment

    7. Check for worn, frayed, or pinched cables. 8. Make sure that the power-supply cover fasteners (screws or rivets) have not been removed or tampered with. Guidelines for servicing electrical equipment Observe the following guidelines when servicing electrical equipment: • Check the area for electrical hazards such as moist floors, nongrounded power extension cords, power surges, and missing safety grounds.
  • Page 35: Server Components

    To reduce the possibility of damage from electrostatic discharge, observe the following precautions: • Limit your movement. Movement can cause static electricity to build up around you. • The use of a grounding system is recommended. For example, wear an electrostatic-discharge wrist strap, if one is available.
  • Page 36: Replacing Frus

    1 and the Safety Information book. To obtain a copy of the Safety Information book, go to:http://www.lenovo.com/support Notes: 1. Use only server parts provided by Lenovo. 2. When installing or replacing a FRU, use the appropriate instructions in this section along with the instructions that come with the FRU.
  • Page 37: Removing And Reinstalling The Front Bezel

    Do not open your server or attempt any repair before reading and understanding the Chapter 1 “About this manual” on page 1 and the Safety Information book. To obtain a copy of the Safety Information book, go to:http://www.lenovo.com/support This section provides instructions on how to remove and reinstall the front bezel.
  • Page 38: Installing Or Replacing A Pci Card

    Do not open your server or attempt any repair before reading and understanding the Chapter 1 “About this manual” on page 1 and the Safety Information book. To obtain a copy of the Safety Information book, go to:http://www.lenovo.com/support This section provides instructions on how to install or replace a PCI card.
  • Page 39 Figure 7. Opening the PCI card latch 4. If you are installing a PCI card, remove the appropriate metal slot cover. If you are replacing an old PCI card, grasp the old card that is currently installed and gently pull it out of the slot. Chapter 6 Replacing FRUs...
  • Page 40 Figure 8. Removing a PCI card Note: The PCI card fits tightly into the card slot. If necessary, alternate moving each side of the PCI card a small amount until it is removed from the card slot. 5. Remove the new PCI card from its static-protective package. 6.
  • Page 41: Replacing The Battery

    Do not open your server or attempt any repair before reading and understanding the Chapter 1 “About this manual” on page 1 and the Safety Information book. To obtain a copy of the Safety Information book, go to:http://www.lenovo.com/support This section provides instructions on how to replace the battery.
  • Page 42: Installing Or Replacing A Memory Module

    Do not open your server or attempt any repair before reading and understanding the Chapter 1 “About this manual” on page 1 and the Safety Information book. To obtain a copy of the Safety Information book, go to:http://www.lenovo.com/support This section provides instructions on how to install or replace a memory module.
  • Page 43 1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the server. 2. Remove the server cover. See “Removing the server cover” on page 30. 3.
  • Page 44: Installing Or Replacing The Optical Drive

    Do not open your server or attempt any repair before reading and understanding the Chapter 1 “About this manual” on page 1 and the Safety Information book. To obtain a copy of the Safety Information book, go to:http://www.lenovo.com/support This section provides instructions on how to install or replace the optical drive.
  • Page 45 Figure 15. Removing the optical drive 5. Install the optical drive retainer on the side of the new optical drive. Figure 16. Installing the optical drive retainer 6. Slide the new optical drive into the optical drive bay from the front of the server until the optical drive snaps into position.
  • Page 46: Replacing The Secondary Hard Disk Drive

    Do not open your server or attempt any repair before reading and understanding the Chapter 1 “About this manual” on page 1 and the Safety Information book. To obtain a copy of the Safety Information book, go to:http://www.lenovo.com/support This section provides instructions on how to replace the secondary hard disk drive.
  • Page 47 Figure 18. Removing the secondary hard disk drive cage 5. Pull on the handle to release and remove the blue hard disk drive bracket from the hard disk drive cage. 6. Flex the sides of the blue bracket to remove the hard disk drive from the bracket. 7.
  • Page 48 9. Slide the hard disk drive cage with the new hard disk drive into the chassis until it is directly underneath the metal tab Figure 20. Installing the secondary hard disk drive 10. Press the hard disk drive cage downward until it snaps into position. Make sure that the hard disk drive cage is secured in the chassis.
  • Page 49: Replacing The Power Supply Assembly

    8. Install and tighten the four screws to secure the new power supply assembly. Note: Use only screws provided by Lenovo. 9. Connect the new power supply assembly cables to the system board and each of the drives. See “System-board internal connectors”...
  • Page 50: Replacing The Heat Sink And Fan Assembly

    Do not open your server or attempt any repair before reading and understanding the Chapter 1 “About this manual” on page 1 and the Safety Information book. To obtain a copy of the Safety Information book, go to:http://www.lenovo.com/support This section provides instructions on how to replace the heat sink and fan assembly.
  • Page 51: Replacing The Microprocessor

    Do not open your server or attempt any repair before reading and understanding the Chapter 1 “About this manual” on page 1 and the Safety Information book. To obtain a copy of the Safety Information book, go to:http://www.lenovo.com/support This section provides instructions on how to replace the microprocessor.
  • Page 52 CAUTION: The heat sink and microprocessor might be very hot. Turn off the server and wait three to five minutes to let the server cool before removing the server cover. To replace the microprocessor, do the following: 1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all power cords from electrical outlets and disconnect all cables that are connected to the server.
  • Page 53: Replacing The System Board

    Do not open your server or attempt any repair before reading and understanding the Chapter 1 “About this manual” on page 1 and the Safety Information book. To obtain a copy of the Safety Information book, go to:http://www.lenovo.com/support This section provides instructions on how to replace the system board.
  • Page 54 4. Remove all memory modules and PCI cards that are currently installed. See “Installing or replacing a memory module” on page 36 and “Installing or replacing a PCI card” on page 32. 5. Remove the secondary hard disk drive. See “Replacing the secondary hard disk drive” on page 40. 6.
  • Page 55 The failing system board must be returned with a microprocessor socket cover to protect the pins during shipping and handling. To install the microprocessor socket cover: 1. Remove the microprocessor from the microprocessor socket. See “Replacing the microprocessor” on page 45. 2.
  • Page 56: Replacing The Primary Hard Disk Drive

    Do not open your server or attempt any repair before reading and understanding the Chapter 1 “About this manual” on page 1 and the Safety Information book. To obtain a copy of the Safety Information book, go to:http://www.lenovo.com/support This section provides instructions on how to replace the primary hard disk drive.
  • Page 57 Figure 29. Installing the hard disk drive into the bracket 8. Slide the new hard disk drive with the blue bracket into the drive cage until it snaps into position. 9. Align the hard disk drive cage pivot pin with the slot primary hard disk driveFigure 30 on page 52.
  • Page 58 Figure 30. Installing the primary hard disk drive 11. Connect the signal cable and the power cable to the new hard disk drive. 12. Go to “Completing the parts replacement” on page 57. ThinkServerHardware Maintenance Manual...
  • Page 59: Replacing The Front Fan Assembly

    Do not open your server or attempt any repair before reading and understanding the Chapter 1 “About this manual” on page 1 and the Safety Information book. To obtain a copy of the Safety Information book, go to:http://www.lenovo.com/support Depending on the model type, your server might have a front fan assembly installed. This section provides instructions on how to replace the front fan assembly.
  • Page 60 Figure 31. Removing the front fan assembly 6. Insert the two tabs of the new front fan assembly into the corresponding holes in the chassis, and press the other two tabs through the holes until the front fan assembly is secured in place. ThinkServerHardware Maintenance Manual...
  • Page 61: Replacing The Rear Fan Assembly

    Do not open your server or attempt any repair before reading and understanding the Chapter 1 “About this manual” on page 1 and the Safety Information book. To obtain a copy of the Safety Information book, go to:http://www.lenovo.com/support This section provides instructions on how to replace the rear fan assembly.
  • Page 62 4. Disconnect the rear fan assembly cable from the system fan connector on the system board. See “System-board internal connectors” on page 25. 5. The rear fan assembly is attached to the chassis by four rubber mounts. Remove the rear fan assembly by cutting the rubber mounts and gently pulling the rear fan assembly out of the chassis.
  • Page 63: Completing The Parts Replacement

    Figure 34. Installing the rear fan assembly 8. Connect the new rear fan assembly cable to the system fan connector on the system board. See “System-board internal connectors” on page 25. 9. Go to “Completing the parts replacement” on page 57. Completing the parts replacement After completing the installation or replacement for all parts, you need to reinstall the server cover and reconnect cables.
  • Page 64: Updating The Server Configuration

    Setup Utility program. Refer to Chapter 8 “Configuring the server” on page 77. Note: In most areas of the world, Lenovo requires the return of the defective FRU. Information about this will come with the FRU or will come a few days after the FRU arrives.
  • Page 65: Chapter 7. Parts Listing, Ts200V Machine Types 0981, 0992, 1008, And 1010

    If Lenovo installs a self-service CRU at your request, you will be charged for the installation. • Optional-service customer replaceable unit: You may install an optional-service CRU yourself or request Lenovo to install it, at no additional charge, under the type of warranty service that is designated for your server.
  • Page 66 Item Microprocessor, Pentium G6950 1066/2800MHz 3MB Cache 73W 2-Thread Dual Core (iGfx 533MHz) (models CTO 12U 12F 12S 12L 12D 12Y 12G 12M 12J 14M 14J 1AU 1AF 1AS) Microprocessor, Core i3 530 1333/2930MHz 4MB Cache 73W 4-Thread Dual Core (iGfx Speed 733MHz) (models CTO) Microprocessor, Core i3-540 / 2.93GHz (models CTO) Microprocessor, Core i5-650 / 3.20GHz (models CTO 18U 18F 18S 18L 18D 18Y 18G...
  • Page 67 18Y 18G 18M 19U 19F 19S 19L 19D 19Y 19G 19M 11U 11F 11S 11L 11D 11Y 11G 11M 12U 12F 12S 12L 12D 12Y 12G 12M) Lenovo RDX drive bay (models CTO) Lenovo RDX cables (models CTO) Lenovo RDX 160GB cartridge (models CTO)
  • Page 68 Line Cord - Brazil (models CTO) Line Cord - LA High Volt (APU) (models CTO) Line Cord - LA High Volt (APU) (models CTO) Line Cord-Australia / New Zealand (models CTO 11M 12M 18M 19M) Line Cord-Australia / New Zealand (models CTO 11M 12M 18M 19M) Line Cord - Korea (models CTO) Line Cord - Korea (models CTO) Line Cord - Hong Kong, UK, Ireland, Singapore, Malaysia, Brunei, Hong Kong (models CTO...
  • Page 69 0981 Windows Server 2008 R2 Foundation 64-bit Turkish (models CTO) Dutch (models CTO) Easy start up DVD (models CTO) 0981 Windows Server 2008 R2 Standard 64-bit English (models CTO) French (models CTO) German (models CTO) Japanese (models CTO) Spanish (models CTO) Italian (models CTO) Turkish (models CTO) Dutch (models CTO)
  • Page 70: Machine Type 0992

    Machine Type 0992 Item Heat sink, 73/95 Watt (models CTO All Models) Microprocessor, Intel Celeron, 2.26G/2M-L2 (models CTO) Microprocessor, Pentium G6950 1066/2800MHz 3MB Cache 73W 2-Thread Dual Core (iGfx 533MHz) (models CTO) Microprocessor, Core i3 530 1333/2930MHz 4MB Cache 73W 4-Thread Dual Core (iGfx Speed 733MHz) (models CTO) Microprocessor, Core i3-540 / 2.93GHz (models CTO 18G) Microprocessor, Core i5-650 / 3.20GHz (models CTO 17G 17J 17M)
  • Page 71 Chassis assembly, mechanical kit (models CTO All Models) Intel Pro/1000 PT dual port Ethernet card (models CTO 17G 17J 17M) Lenovo RDX drive bay (models CTO All Models) Lenovo RDX cables (models CTO All Models) Lenovo RDX 160GB cartridge (models CTO All Models)
  • Page 72 Lenovo RDX 320GB cartridge (models CTO All Models) Lenovo RDX 500GB cartridge (models CTO All Models) Easy startup DVD (models CTO All Models) 256MB NVIDIA FX380 (2xDVI) (models CTO 19U 19F 19S 19L 19D 19Y 19G 19M 19J) Line Cord - US (models CTO)
  • Page 73 Line Cord - India (models CTO) Line Cord - India (models CTO) Line Cord - Line Cord - Austria, Belgium, Croatia, Czechoslovakia, Finland France Germany Hungary, Netherlands, Norway, Poland, Portugal Romania, Spain, Sweden (models CTO) Line Cord - Line Cord - Austria, Belgium, Croatia, Czechoslovakia, Finland France Germany Hungary, Netherlands, Norway, Poland, Portugal Romania, Spain, Sweden (models CTO) 0992 Windows Server 2008 R2 Foundation 64-bit English (models CTO)
  • Page 74: Machine Type 1008

    Machine Type 1008 Item Heat sink, 73/95 Watt (models CTO All Models) Microprocessor, Intel Celeron, 2.26G/2M-L2 (models CTO 15D 15F 15G 15J 15L 15M 15S 15U 15Y) Microprocessor, Pentium G6950 1066/2800MHz 3MB Cache 73W 2-Thread Dual Core (iGfx 533MHz) (models CTO) Microprocessor, Core i3 530 1333/2930MHz 4MB Cache 73W 4-Thread Dual Core (iGfx Speed 733MHz) (models CTO) Microprocessor, Core i3-540 / 2.93GHz (models CTO)
  • Page 75 Chassis assembly, mechanical kit (models CTO All Models) Intel Pro/1000 PT dual port Ethernet card (models CTO 15D 15F 15G 15J 15L 15M 15S 15U 15Y) Lenovo RDX drive bay (models CTO All Models) 1008 FRUs 1008 FRUs Chapter 7...
  • Page 76 Lenovo RDX cables (models CTO All Models) Lenovo RDX 160GB cartridge (models CTO All Models) Lenovo RDX 320GB cartridge (models CTO All Models) 256MB NVIDIA FX380 (2xDVI) (models CTO All models) Easy start up DVD (models CTO) Lenovo RDX 500GB cartridge (models CTO All Models)
  • Page 77 Line Cord - Switzerland (models CTO 15G) Line Cord - Switzerland (models CTO 15G) Line Cord - Israel (models CTO 15G) Line Cord - Israel (models CTO 15G) Line Cord - South Africa (models CTO 15M) Line Cord - South Africa (models CTO 15M) Line Cord - India (models CTO) Line Cord - India (models CTO) Line Cord - Austria, Belgium, Croatia, Czechoslovakia, Finland France Germany Hungary,...
  • Page 78: Machine Type 1010

    1008 Windows Small Business Server 2008 Standard w/ SP2 Turkish (models CTO) Dutch (models CTO) Machine Type 1010 Item Heat sink, 73/95 Watt (models CTO All Models) Microprocessor, Intel Celeron, 2.26G/2M-L2 (models 16D 16F 16G 16J 16L 16M 16S 16U 16Y)) Microprocessor, Pentium G6950 1066/2800MHz 3MB Cache 73W 2-Thread Dual Core (iGfx 533MHz) (models CTO) Microprocessor, Core i3 530 1333/2930MHz 4MB Cache 73W 4-Thread Dual Core...
  • Page 79 Item Memory modules, DDR3 ECC PC3-10600 2GB UDIMM (1333) (models CTO) Memory modules, DDR3 ECC PC3-10600 4GB UDIMM (1333) (models CTO 16D 16F 16G 16J 16L 16M 16S 16U 16Y) Optical drive, DVD-ROM Drive, 16x/48x (SATA) (models CTO 16D 16F 16G 16J 16L 16M 16S 16U 16Y) Optical drive, DVD Burner/CD, RW Rambo 8 (SATA) (models CTO) Front Bezel assembly (models CTO All Models)
  • Page 80 Chassis assembly, mechanical kit (models CTO All Models) Lenovo RDX drive bay (models CTO All Models) Lenovo RDX cables (models CTO All Models) Lenovo RDX 160GB cartridge (models CTO All Models) Lenovo RDX 320GB cartridge (models CTO All Models) Easy startup DVD (models CTO All Models)
  • Page 81 Line Cord - Israel (models CTO 16G) Line Cord - Israel (models CTO 16G) Line Cord - South Africa (models CTO 16M) Line Cord - South Africa (models CTO 16M) Line Cord - India (models CTO) Line Cord - India (models CTO) Line Cord - Austria, Belgium, Croatia, Czechoslovakia, Finland, France, Germany, Hungary, Netherlands, Norway, Poland, Portugal Romania, Spain, Sweden (models CTO) Line Cord - Austria, Belgium, Croatia, Czechoslovakia, Finland, France, Germany, Hungary,...
  • Page 82 ThinkServerHardware Maintenance Manual...
  • Page 83: Chapter 8. Configuring The Server

    The Setup Utility program menu lists various items about the system configuration. To view or change settings, start the Setup Utility program. See “Starting the Setup Utility program” on page 77. Then, follow the instructions on the screen. © Copyright Lenovo 2010,...
  • Page 84: Using Passwords

    When working with the Setup Utility program menu, you must use the keyboard. The keys used to perform various tasks are displayed at the bottom of each screen. Using passwords By using the Setup Utility program, you can set passwords to prevent unauthorized access to your server and data.
  • Page 85: Enabling Or Disabling A Device

    2. From the Setup Utility program main menu, select Security. 3. Depending on the password type, select Set Power-On Password, Set Administrator Password, or Hard Disk Security ® Hard Disk Password. 4. Follow the instructions on the right side of the screen to set, change, or delete a password. Note: A password can be any combination of up to 64 alphabetic and numeric characters.
  • Page 86: Advanced Settings

    To view or permanently change the configured startup device sequence, do the following: 1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 77. 2. From the Setup Utility program main menu, select Startup ® Primary Boot Sequence. Read the information displayed on the right side of the screen.
  • Page 87: Configuring The System Uefi To Enable Sata Raid Functionality

    – Improved read performance and 100% redundancy To install a secondary hard disk drive, refer to “Installing a secondary hard disk drive” on page 40. Configuring the system UEFI to enable SATA RAID functionality This section describes how to configure the system UEFI to enable SATA RAID functionality. Note: Use the arrow keys on the keyboard to make selections.
  • Page 88: Updating System Programs

    Utility program by starting your server with a flash update disc or running a special update program from your operating system. Lenovo might make changes and enhancements to the POST and UEFI. When updates are released, they are available as downloadable files on the Lenovo Web site at http://www.lenovo.com. Instructions for using the POST/UEFI updates are available in a TXT file that is included with the update files.
  • Page 89: Updating (Flashing) The Uefi From Your Operating System

    Updating (flashing) the UEFI from your operating system Note: Because Lenovo makes constant improvements to the Web site, the Web page contents are subject to change without notice, including the contents referenced in the following procedure.
  • Page 90: Using The Thinkserver Easystartup Program

    DVD with your server, you can download an ISO image of the DVD from http://www.lenovo.com/support. The program has a built-in help system and User Guide to answer questions you might have. The program also provides compatibility notes to help you determine what server configurations and operating systems are supported by that specific version of the program.
  • Page 91: Installing Thinkserver Easymanage Agent

    To start the ThinkServer EasyStartup DVD, do the following: 1. Insert the ThinkServer EasyStartup DVD and restart the server. If the EasyStartup program does not start, see “EasyStartup problems” on page 18. 2. Follow the instructions on the screen and continue to the main interface. 3.
  • Page 92 ThinkServerHardware Maintenance Manual...
  • Page 93: Appendix A. Notices

    Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.
  • Page 94: Export Classification Notice

    Macrovision Corporation. Reverse engineering or disassembly is prohibited. European conformance CE mark Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo The Lenovo logo ThinkServer Microsoft, Windows, and Windows Server are trademarks of the Microsoft group of companies.
  • Page 95: Industry Canada Class B Emission Compliance Statement

    • Consult an authorized dealer or service representative for help. Lenovo is not responsible for any radio or television interference caused by using other than specified or recommended cables or connectors or by unauthorized changes or modifications to this equipment.
  • Page 96: Japanese Vcci Class B Statement

    Note: If the device is an internal modem, a second FCC registration label is also provided. You may attach the label to the exterior of the computer in which you install the Lenovo modem, or you may attach the label to the external DAA, if you have one. Place the label in a location that is easily accessible, should you need to provide the label information to the telephone company.
  • Page 97: Canadian Department Of Communications Certification Label

    Ringer Equivalence Numbers of all the devices does not exceed 5. Power cord notice For your safety, Lenovo provides a power cord with a grounded attachment plug to use with this product. To avoid electrical shock, always use the power cord and plug with a properly grounded outlet.
  • Page 98 The cord set should have the appropriate safety approvals for the country in which the equipment will be installed. Power cords provided by Lenovo for a specific country or region are usually available only in that country or region.
  • Page 99: Polyvinyl Chloride (Pvc) Cable And Cord Notice

    Wash hands after handling. Turkish statement of compliance The Lenovo product meets the requirements of the Republic of Turkey Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (EEE). Waste electrical and electronic equipment (WEEE) notices Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed.
  • Page 100: European Union (Eu) Weee Statement

    If you want to replace it with a new one, contact your place of purchase or ask for a repair service provided by Lenovo. If...
  • Page 101 If you use a Lenovo computer at home and need to dispose of a lithium battery, you must comply with local ordinances and regulations. Appendix A. Notices...
  • Page 102 ThinkServerHardware Maintenance Manual...
  • Page 103: Index

    © Copyright Lenovo 2010, Input/Output (I/O) features installing device drivers installing options memory module PCI card...
  • Page 104 removing server cover replacing battery hard disk drive heat sink and fan assembly security enabling or disabling selecting startup device temporary startup device serial port server components server cover removing server cover, reinstalling setting password settings advanced changing viewing Setup Utility Setup Utility program, starting Setup Utility, exiting specifications...
  • Page 106 Part Number: Printed in USA (1P) P/N:...

Table of Contents