Lenovo ThinkPad SL400c Hardware Maintenance Manual page 48

40
ThinkPad SL400, SL400c, SL500, and SL500c Hardware Maintenance Manual
Table 1. Numeric error codes (continued)
Symptom or error
7001
(HDCP) Memory is not enough for HDCP
Key Provisioning!
7002
(HDCP) Failed to check the key set
Family-EKS!
7003
(HDCP) Chip-Unique-EKS re-encryption
failed!
7004
(HDCP) Failed to check the key set
Chip-Unique-EKS!
7005
(HDCP) Cipher Initialization with
Chip-Unique-EKS failed!
8100
Gate20 Error
8101
Multi-Bit ECC Error
8102
Parity Error
8103
RAM R/W test failed
8104
CMOS Memory Size Wrong
8200
Boot Failure ...
8201
Invalid Boot Diskette
8202
Drive Not Ready
8203
A: Drive Error
8204
B: Drive Error
8205
Insert BOOT diskette in A:
8206
Reboot and Select proper Boot device or
Insert Boot Media in selected Boot device
8207
NO ROM BASIC
FRU or action, in sequence
Add the DIMMs.
System board.
System board.
System board.
System board.
1. System board.
2. DIMM.
1. DIMM.
2. System board.
1. DIMM.
2. System board.
1. DIMM.
2. System board.
1. DIMM.
2. System board.
Reseat the boot device. Confirm that boot
image is stored in the failing device.
Confirm that boot image is stored in the
failing diskette.
Confirm that the boot media is installed in
the driver.
Reseat the diskette drive.
1. Diskette drive.
2. USB cable (if diskette drive has removal
USB cable.)
Reseat the diskette drive.
1. Diskette drive.
2. USB cable (if diskette drive has removal
USB cable.)
Reaset the diskette cable. Confirm that
boot image is stored in the failing diskette.
Reseat the bootable devices. Confirm that
the bootable device or media is in the
system.
Reseat the bootable devices. Confirm that
the bootable device or media is in the
system.