Toshiba RAS-10SKVP2-E Service Manual page 101

No. Part name
…
Side cabinet 1. Side cabinet (right)
2. Side cabinet (left)
Detail A
†
Fan motor 1) Perform work of item 1 of
2) Remove the flange nut fixing the fan motor
3) Remove the propeller fan.
4) Disconnect the connector for fan motor
5) Remove the fixing screws (4 pcs.) holding
Procedure
‚
1) Perform step 1 in
ƒ
.
2) Remove the fixing screw (ST1TØ4 × 10L
3 pcs.) used for securing the side
cabinet to the bottom plate and valve
fixing panel.
‚
1) Perform step 1 in .
2) Remove the fixing screw (ST1TØ4 × 10L
1 pc.) used to secure the side cabinet
(left) onto the heat exchanger.
3) Remove the fixing screw (ST1TØ4 × 10L
2 pcs.) used for securing the side cabinet
to the bottom plate and heat exchanger.
Detail B
and the propeller.
• Flange nut is loosened by turning clock-
wise. (To tighten the flange nut, turn
counterclockwise.)
from the inverter.
by hands so that the fan motor does not
fall.
* Precautions when assembling the fan
motor
Tighten the flange nut using a tightening
torque of 4.9 N•m.
and all the steps in
Detail C
 ‚
and .
Flange nut
– –
100
FILE NO. SVM-11015
Remarks
Hook the claw onto
the bottom plate
B
C
The ba k body section hooked c
onto the bottom plate here.
Propeller fan
Fan motor
A