Steam Boiler Temperature - La Marzocco GS/3 Owner's Manual

Steam Boiler Temperature

Steam Boiler
°
Temp 245.5 F
Display
1
Enter into "Machine On" programming mode.
o
200.5 F 06:30
La Marzocco T:00
2
Press the button
Doses Setting
Select within30s
3
Then press the button
Clock Adjust
4
Scroll through the displayed parameters
5
Steam Boiler Press the button
o
Temp 245.5 F
6
When finished, press the button
NOTE: It is also possible to change the temperature of the steam boiler using the "Quick Keys". Please see the section
entitled "Quick Keys"
Description
• This parameter is set at the factory at a
preset nominal temperature.
• The temperature of saturated water
is proportional to the pressure inside
the Steam Boiler. Therefore it is
possible to regulate the pressure of the
steam boiler by means of electronic
temperature control. Please use the
following tables as reference when
setting the steam boiler temperature.
Operating Procedure
to enter into programming mode
to access the adjustable parameters.
using the button until the following display appears:
or the button to change tthe value of the flashing parameter.
to continue to the next parameter.
THE STEAM BOILER CONTAINS WATER AT ELEVATED
TEMPERATURES. WATER TEMPERATURE OVER 125 °F CAN CAUSE
SEVERE BURNS INSTANTLY OR DEATH FROM SCALDING.
"Machine ON" Programming
Temperature Pressure
247°F/119°C
260°F/127°C
272°F/133°C
CAUTION
The saturation temperature of water will vary
with ambient atmospheric pressure.
Tables in this manual are created for
atmospheric pressure at sea level. Slight
adjustment in temperature will be required for
elevations other than sea level.
DANGER
1.0 bar
1.5 bar
2.0 bar
51