Coffee Boiler Temperature - La Marzocco GS/3 Owner's Manual

"Machine ON" Programming

Coffee Boiler Temperature

Temp Cof. Boiler
°
200.5 F
Display
1
Enter into "Machine On" programming mode.
o
200.5 F 06:30
La Marzocco T:00
2
Press and hold the button
Doses Setting
Select within30s
3
Clock Adjust
Then press the button
4
Scroll through the displayed parameters using the button
5
Press the button
Temp Cof. Boiler
o
200.5 F
6
When finished, press the button
NOTE: It is also possible to change the
temperature of the coffee boiler using the
"Quick Keys". Please see the section entitled
"Quick Keys"
50
Description
• This parameter is set at the factory at a
preset nominal temperature.
• The temperature of the boiler is
measured at the most critical point
in the boiler where temperature
fluctuation is the greatest.
• The temperature of the water exiting
the group head is held constant by
means of the mass of the group
casting. Even though the temperature
Operating Procedure
to enter into programming mode.
to access the adjustable parameters.
or the button to change the value of the parameter.
to continue to the next parameter.
THE STEAM BOILER CONTAINS WATER AT ELEVATED
TEMPERATURES. WATER TEMPERATURE OVER 125 °F CAN CAUSE
SEVERE BURNS INSTANTLY OR DEATH FROM SCALDING.
of the boiler may vary slightly, the
temperature of the water exiting the
group is constant.
• To properly calibrate the temperature
of any espresso machine it is import
to measure the temperature of the
water exiting the group by means of
an external temperature measuring
device. The difference of the display
temperature and
temperature may be compansated by
use of the "Coffee T. Offset" parameter.
until the following display appears:
DANGER
the measured