Water Volume Programming
Doses Setting
select within 30s
Display
1
Enter into "Machine On" programming mode.
o
200.5
F 06:30
La Marzocco T:00
2
Press one of the following buttons:
Doses Setting
Select within30s
3
Water will begin to flow. When the desired amount of water has been dispensed, press the same button again to
Stop the flow of water. The button is now programmed. Repeat this process for subsequent buttons.
Description
• This parameter allows the operator
to program the water volume (shot
volume) for the individual buttons on
the keypad.
• The saved program is a number. This
number relates to the number of
pulses the flowmeter delivers to the
CPU. Once the programmed number of
pulses is received by the CPU, the flow
of water is stopped.
Operating Procedure
"Machine ON" Programming
• This parameter is not available on MP
Paddle model as volume is manually
controlled by use of paddle, except for
the last button that controls the dose
of hot water brewed.
47