Start-Up Procedures; Turning The Espresso Machine On - La Marzocco GS/3 Owner's Manual

Installation guide software manual
Hide thumbs Also See for GS/3:
Table of Contents

Advertisement

Start Up Procedures
Turning the Espresso
Machine On
Display
Turn the Main Switch to the On position.
1
1
2
The message at left will be displayed briefly. This message indicates the revision level of the software installed in this
3D5 DE LUXE MAR
espresso machine. Then the following message is displayed.
OFF
09:30
3
To complete the turn on process, press the button
o
170.5
F
06:30
La Marzocco T:00
automatically fill the steam boiler until full. When the espresso machine reaches operating temperature, all keypad
lights will light indicating that the espresso machine is ready to use.
32
Description
The following is the procedure for turning
on the power to the espresso machine.
• Please follow the procedures carefully
to avoid any damage to the espresso
machine.
• Continue with the water reservoir full
or a mains water connection.
Operating Procedure
NOTE: Ensure all air is removed from the group prior to staring the espresso
machine. This only needs to be completed once during the initial setup or when
water is drained from the coffee boiler.
Instructions for bleeding the groups of air can be found in the Installation Guide.
HAZARDOUS VOLTAGE DISCONNECT FROM POWER SUPPLY BEFORE SERVICING
and the display at left is shown. The machine begins to

Advertisement

Table of Contents
loading

Table of Contents