Pid Setting - La Marzocco GS/3 Owner's Manual

"Machine OFF" Programming

PID Setting

PID Setting
°
20.1 F
Display
1
Enter into "Machine Off" programming mode.
OFF 09:30
2
Scroll through the displayed parameters using the button
Language
English
3
Press the button
PID Setting
o
20.1 F
4
When finished, press the button
44
Description
• This parameter sets a range in which
the PID algorithm is active.
• This parameter is preset at the factory
based upon theoretical calculations
and physical experiments.
• It is not recommended that this number
is changed. Changes to this parameter
can cause unexpected results.
Operating Procedure
or the button to change the value of the parameter.
to continue to the next parameter.
• It is important to write down the
number before any changes are made
to make sure you can return to the
factory programming if unexpected
results occur.
• Experienced technicians may wish to
experiment with different values.
• The lowest value for this parameter is
3.6°F / 2.0°C
until the following display appears: