Memory Card Operation - Canon HV10 Instruction Manual

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - e ••••
Trouble?
Problem Solution
CD
Pressing the playback button Load a cassette. 19
does not start playback.
Set the camcorder to I>PLAY"J§§I\.
27
Tape reached the end ("[§] END" appears on the screen). 19
Rewind the tape.
No sound from the built-in Open the LCD panel.
-
speaker.
Speaker volume is turned off. Adjust the volume with the ~
27
dial.
When playing back a tape Video heads are dirty. Clean the video heads. 82
recorded in HDV standard the
playback is jerky or the sound
stutters on and off.
Image will not appear on the
Set [AV .. DV] to [OFF].
33
TV screen.
Check again that the camcorder is properly connected to the TV
57
When connecting the camcorder to an HDTV using the CTC-1 00
57
Component Cable, make sure to select the correct specification
for the [COMPOUT] setting.
There is no sound from the TV When connecting the camcorder to an HDTV using the CTC-1 00 57
Component Cable, make sure to connect also the audio
connections using the white and red plugs of the STV-250N
Stereo Video Cable.
Text displays do not appear on If you connected the camcorder to the TV using the video 35
the TV component connection, set [DV OUTPUT] to [HDV/DV].
Tape is running, but image will TVNIDEO selector on the TV is not set to VIDEO. Set the 59
not appear on the TV screen. selector to VIDEO.
Video heads are dirty. Clean the video heads. 82
You attempted to play back or dub copyright a protected tape. 62
Stop playback/dubbing.
Memory Card Operation
Problem
Memory card cannot be
inserted.
Cannot record on the memory
card.
Memory card cannot be played
back.
Image cannot be erased.
"[] " flashes in red.
Solution
Memory card was not facing the correct direction. Turn the
memory card over and reinsert it.
Memory card is full. Erase still images to free some space or
replace the memory card.
Memory card was not initialized. Initialize the memory card.
The folder and file numbers have reached their maximum value.
Set [FILE NOS.] to [RESET] and insert a new memory card.
Set the camcorder to
IPlAy~r::gil.
Image is protected. Cancel the protection.
Card error occurred. Turn off the camcorder. Remove and
reinsert the memory card. Initialize the memory card if flashing
persists.
CD
20
55
56
33
29
55
56
-