Canon HV10 Instruction Manual page 32

IIMG STAB
[Q2J1
[~
STO PLAY], [m LONG PLAY]
When [HD STANDARD] is set to one of
the DV standards you can change the
video quality and as a result, also the
available recording time.
• Recording in LP mode extends the
available recording time on the tape 1.5
times.
• Depending on the condition of the tape
(long usage, imperfections, etc.) you
~ay
notice some video problems (blocky video
artifacts, banding, etc.) in the playback
picture when playing back recordings
[It@l] HOV],
[~
DV(WIDE)],
[[E!1] DV(NORMAL)]
Selects the video standard of the
recording and in DV standard also the
aspect ratio. .
[It@l] HDV]: High definition video at 10801
specifications with 16:9 aspect ratio.
[~
DV(WIDE)]: Standard definition
digital video with 16:9 aspect ratio.
[!I!l!IJ DV(NORMAL)]: Standard definition
digital video with 4:3 aspect ratio.
• We recommend not mixing recordings
made in different video standards on the
same tape.
• Playing back a widescreen recording: TV
sets compatible with the Video 10-1
system will automatically switch to wide
(16:9) mode. Otherwise, change the
aspect ratio of the TV manually. To play
back on a TV with normal aspect ratio
(4:3) change the [TV TYPE] setting
accordingly (OJ 34).
I
DV REC MODE
I
HD STANDARD
.tIl
REC/IN SETUP
..........................................
(C!I!~] [CA~!AJ
I
Mode switch:
P, SCN
[mJ ON], [[m OFF]
The image stabilizer compensates for
camcorder shake even at full telephoto.
• The image stabilizer is designed to
compensate for a normal degree of
camcorder shake.
• The image stabilizer may not be
effective when recording in dark places
using the
[P.]
NIGHT] recording program
(SCN).
• The image stabilizer cannot be turned
off when the mode switch is set to 0>.
• We recommend setting the image
stabilizer to [[m OFF] when using a
tripod.
[mJ ON], [[m OFF]
The camcorder records the still image
only after the focus has been adjusted.
• Set it to [[m OFF] if you wish to record
a still image as soon as you press
IPHOTOI.
When set to [[m OFF], no
focusing frame appears.
• Focus priority cannot be turned off
when the mode switch is set to 0>.
• In the
[II
FIREWORKS] recording
program
(SCN)
the focus priority is
automatically set to [[m OFF].
[B AUTO], [[m OFF]
I
FOCUS PRI.