Magnifying The Playback Image; Slide Show - Canon HV10 Instruction Manual

Playback ......- - - - - - - - - - - - - - - - - - - - - - - - - -
1
Press
[FUNC.J.
2
Select
(~T) [~>
SLIDESHOW] and
press
[SET ].
3
Select
(~T)
[START] and press
[SET).
Press
I
FUNC·I
to stop the slideshow.
Index Screen
1
Move the zoom lever toward W.
The index screen appears.
2
Select
(~T)
an image.
• Move the cursor CB to the image
you want to view.
• Press
[±)
or
G
to move to the next/
previous index page.
3
Move the zoom lever toward T.
The index screen closes and the
selected image is displayed.
• Avoid the following actions while the card
access display
~ .DI
appears on screen, and
when the CARD access indicator is on or
flashing. Failing to do so may result in
permanent data loss.
- Do not open the memory card slot cover and
do not remove the memory card.
- Do not disconnect the power source or turn off
the camcorder.
- Do not change the position of the
§J / [J;I
switch or the operating mode.
• The following may not be displayed correctly.
- Images not recorded with this camcorder.
- Images edited on or uploaded from a
computer.
- Images whose file names have been
changed.
Slideshow
EI
SLiDESHOW
o
IMPORTANT
(OJ
10)
1
Move the zoom lever toward T.
• The image is magnified by 2 times
and a frame appears indicating the
position of the magnified area.
• To further enlarge the image, move
the zoom lever toward T. To reduce the
magnification, move the zoom lever
toward W.
•
~
will appear for images that cannot
be enlarged.
2
Select the enlarged area of the
picture with the
[SET
I
dial. .
• Move (.T) the frame right/left or up/
down. Press
~
to change between
the directions.
• To cancel the magnification, move
the zoom lever toward W until the
frame disappears.
Magnifying the Playback Image
During playback, movies and still images
can be magnified up to 5 times. You can
also select the area to be magnified.
----_._
..
_ _ .]
. . , I I . · ~ . : . · . · . · ~ . ' · ; . · ·
. . . .
t1fJ; SET
~.::
...
FUNC.
FUNC.
(OJ23)