Canon HV10 Instruction Manual page 77

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - e ••••
Trouble?
Message Explanation/Solution
OJ
INCORRECT TAPE You attempted to play back a tape recorded in a different television
-
SPECIFICATION system (PAL or SECAM) or in a recording standard not supported
by this camcorder.
INPUT SIGNAL NOT The digital device connected with the DV cable is incompatible with -
SUPPORTED the camcorder.
PLAYBACK STD LOCKED Current camcorder settings do not match the HDV/DV standard of 34
INCOMPATIBLE VIDEO the video input signal. Change the [PLAYBACK STD] setting to
INPUT
match the video input signal.
PLAYBACK STD LOCKED Current camcorder settings do not match the HDV/DV standard of 34
PLAYBACK IS the recording you tried to play back. Change the [PLAYBACK STD]
RESTRICTED
to match the recording standard of the tape.
HEADS DIRTY, USE
Video heads are dirty. Clean the video heads.
82
CLEANING CASSETTE
COPYRIGHT PROTECTED You attempted to play back a copyright protected tape.
62
PLAYBACK IS RESTRICTED
COPYRIGHT PROTECTED You attempted to dub a copyright protected tape. May also appear 62
DUBBING RESTRICTED when an anomalous signal is received during analog .line-in
recording.
NO CARD Memory card not is inserted into the camcorder. 20
NO IMAGES No images are recorded on the memory card. -
CARD ERROR
A memory card error occurred. The camcorder cannot record or -
display the image.
The error may be temporary. If the message disappears after 4
seconds and"
OJ"
flashes red, turn the camcorder off, remove the
card and· reinsert the card. If"
OJ"
changes to green, you can
continue recording/playback.
CARD FULL
Memory card is full. Erase some images to free some space or 55
replace the memory card.
IN CARD POSITION
You pressed
\StartfStop\
while recording still images
(tCAMERA·Ql\
-
mode).
NAMING ERROR The folder and file numbers have reached their maximum value. 55
Set the [FILE NOS.] option to [RESET] and erase all the images on 56
the memory card or initialize it.
UNIDENTIFIABLE IMAGE The image file is corrupted or it was saved using a compression -
method other than that compatible with this camcorder (JPEG).
g TRANSFER ORDER
You attempted to set more than 998 transfer orders. 67
ERROR
~
PRINT ORDER ERROR
You attempted to set more than 998 still images in the print order. 71
CANNOT TRANSFER! You attempted to transfer a still image that cannot be displayed with -
this camcorder.
TOO MANY STILL IMAGES
Disconnect the USB cable and decrease the number of still images
-
DISCONNECT USB CABLE on the memory card to less than 1800. If a dialog appeared on the
computer screen, close it and then restore the connection.
-