Trimming Settings - Canon HV10 Instruction Manual

print by selecting 2-, 4-, 9- or [16-UP]. You can
also use this setting to print on the specially
designed photo stickers sheets.
- When the paper size is set to [A4] you can
print 4 copies on the same sheet by selecting
[4-UP] .
• Canon PIXMAISELPHY CP Printers:
- When the paper size is set to [CREDITCARD]
you can print multiple small copies on a single
print by selecting 2-, 4-, or [8-UP]. You can also
use [8-UP] to print on the specially designed
photo stickers sheets.
- When the paper size is set to [10 x 14.8 cm]
or [9 x 13 cm] you can print 2 or 4 copies on the
same sheet by selecting [2-UP] or [4-UP].
- When you are using the specially designed
wide-sized photo paper you can set the paper
size to [DEFAULT] and print 2 or 4 copies on
the same sheet by selecting [2-UP] or [4-UP].
Printing after Changing the Print Settings
1
Press
[SET
I.
• The print setting menu appears.
• Depending on the printer, the
message "BUSY." may appear before
the camcorder displays the print
setting menu.
2
In the print settings menu, select
(J..T)
the setting you want to change
and press
ISET
I.
3
Select
(J..T)
the desired setting
option and press
[SET
I.
4
Select
(J..T)
[PRINT] and press
ISET].
• Printing starts. The print setting menu
disappears when the printing is
completed.
• To continue printing, select another
still image.
To
CANCEL THE PRINTING
Press
[§§TI
while printing. A confirmation
dialog appears. Select [OK] and press
[§§TI .
With Canon's PictBridge compatible printers,
the printing will stop immediately (even if not
completed) and the paper will be fed through.
PRINTING ERRORS
If an error occurs during the printing process, an
error message appears (QJ 78).
- Canon's PictBridge compatible printers:
Resolve the error. When printing does not
resume automatically, select [CONTINUE] and
press
[§§TI.
If [CONTINUE] cannot be
selected, select [STOP], press
[§§TI
and retry
printing. Refer also to the printer's instruction
manual for details.
- If the error still persists and printing does not
restart, disconnect the USB cable and turn off
the camcorder and the printer. After a short
while, turn them on again, set the camcorder to
IPL.AY·!Jd<1
mode and restore the connection.
WHEN YOU HAVE FINISHED PRINTING
Disconnect the cable from the camcorder and
printer and turn off the camcorder.
OlMPORTANT
• The following still images may not be
correctly printed with a PictBridge compatible
printer.
- Images created or changed on a computer
and transferred to the memory card.
- Images recorded with the camcorder but
edited on a computer.
- Images whose file names were changed.
- Images not recorded with this camcorder.
• Observe the following precautions during
printing:
- Do not turn off the camcorder or the printer.
- Do not change the position of the
~
/
~
switch.
- Do not disconnect the USB cable.
- Do not remove the memory card.
• If the message "BUSY" does not disappear,
disconnect the USB cable and restore the
connection after a short while.
Trimming Settings
Set the paper size and page layout before
changing the trimming settings.
1
In the print setting menu, select
(J..T)
[TRIMMING] and press
ISET
I.