Trimming Settings - Canon Vixia HF11 Instruction Manual

Photos
I
PRINT ERRORS
If an error occurs while printing, an error
message, for example [NO PAPER], will
appear on the camcorder. Solve the
problem referring to the error message list
(OJ
109) and to the printer's instruction
manual.
• Canon's PictBridge-compatible printers: If
printing does not resume automatically
after you solved the problem, select
[CONTINUE] and press
@
to resume
printing. If that option is not available,
select [STOP] and press
@
and then
restart printing from the beginning.
• Other printers or if the error still persists with
a Canon printer: If printing does not
resume automatically, disconnect the
USB cable and turn off the camcorder.
After a short while, turn on the
camcorder and restore the USB
connection.
o
IMPORTANT
• You may not be able to print correctly
with a PictBridge-compatible printer still
images whose file names have been
changed or that were recorded, created,
edited or changed with any device other
than this camcorder.
• If [BUSY] does not disappear,
disconnect the USB cable and restore
the connection after a short while.
76
Trimming Settings
Set the paper size and page layout
before changing the trimming settings.
1
Open the print settings menu.
Refer to steps 1-2 in Printing after
Changing the Print Settings (OJ 75).
2
Select (.AT, .....
~)
[TRIMMING] and
press
@.
The trimming frame appears.
3
Change the size of the trimming
frame.
• Move the zoom lever toward T to
shrink the frame, and move it
toward W to enlarge it. Press
@
to change the orientation of the
frame (portrait/landscape).
• To cancel the trimming settings,
move the zoom lever toward W
until the trimming frame
disappears.
4
Move (.AT, .....
~)
the trimming
frame to the area of the picture
you want to print.