Mechanical Design; Power Input; Communication Interface; Led Indicator - SignaMax 065-7403HTB User Manual

Unmanaged industrial ethernet switch

【Mechanical design】

：

065-7403HTB

The lower panel of SIGNAMAX 065-7403HTB switch provides industrial terminals V- 、V+, power input is

12～36 V DC.

100BaseFX Optical port

100BaseFX full duplex fiber interface. Fiber interfaces should be used in pairs. TX is the optical sending

port, RX is the optical receiving port. The fiber interface supports dropped instructions, so that network

reliability can be improved efficiently.

10/100BaseT/TX Interface

10/100BaseT/TX Ethernet interface is on the front panel of the device. Interface type is RJ45。

LEDs on the front panel of SIGNAMAX 065-7403HTB switch show system and port working state,

so you can find and solve problems. These meanings are shown as below:

Port Indicator Status

Green

Yellow

SIGNAMAX 065-7403HTB Unmanaged Industrial Ethernet Switch User Manual

Description

Green On—Port works at 100Mbps

Green Off—Port works at 10Mbps

Yellow On—data is being transmitted.

Yellow Off— data is not being transmitted.

Table of Contents