Samba - D-Link DIR-620 User Manual

DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
User Manual

Samba

On the USB storage / Samba page, you can enable the built-in Samba server of the router to
provide access to the USB storage for users of your LAN.
You can enable the Samba server only when a USB storage is connected to the router (in this case,
the Connected value is displayed in the USB storage field). To enable the Samba server, select
the Enable checkbox.
The Anonymous login checkbox enables anonymous access to the content of the USB storage
for users of your LAN. By default, the checkbox is selected.
If you want to provide authorized access to the content of the USB storage for users of your LAN,
deselect the checkbox. After applying the parameters on this page, proceed to the System / USB
users page and create needed accounts.
In the Workgroup field, leave the value specified by default (WORKGROUP) or specify a new name
of a workgroup which participants will have access to the content of the USB storage.
In the NetBIOS field, specify a new name of the USB storage for identification in your LAN. Use
digits and/or Latin characters.
After specifying the needed parameters, click the Apply button.
To disable the built-in Samba server of the router, deselect the Enable checkbox and click the
Apply button.
Figure 151. The USB storage / Samba page.
Page 193 of 225
Configuring via Web-based Interface