System Log - D-Link DIR-620 User Manual

DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
User Manual

System Log

On the System / System log / Configuration page, you can set the system log options and
configure sending the system log to a remote host.
To enable logging of the system events, select the Logging checkbox. Then specify the needed
parameters.
Control
Logging type
Logging level
Server
Figure 162. The System / System log / Configuration page.
Select a type of logging from the drop-down list.
Local: the system log is stored in the router's memory (and
•
displayed on the System / System log / Log page). When
this value is selected, the Server and Port fields are not
displayed.
Remote: the system log is sent to the remote host specified in
•
the Server field.
Local and remote: the system log is stored in the router's
•
memory (and displayed on the System / System log / Log
page) and sent to the remote host specified in the Server
field.
Select a type of messages and alerts/notifications to be logged.
The IP or URL address of the host from the local or global network,
to which the system log will be sent.
Page 209 of 225
Configuring via Web-based Interface
Description