Pin - D-Link DIR-620 User Manual

DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
User Manual

PIN

On pages of the 3G/LTE modem / PIN section, you can change the PIN code of the identification
card inserted into your USB modem, disable or enable the check of the PIN code.
!
The operations presented in this section are not available for LTE and CDMA USB
modems.
On the 3G/LTE modem / PIN / PIN code management page, the current state of the
identification card inserted into your USB modem is displayed in the Status field. If the PIN code
is entered incorrectly or the PIN code is not entered when the PIN code check is enabled, the
Device is locked value is displayed in the Status field. If the PIN code is entered correctly or
the PIN check is disabled, the Device is unlocked value is displayed in the Status field.
If the PIN code check for the SIM card inserted into your USB modem is not disabled, the Yes
value is displayed in the PIN check field. If the PIN check is disabled, the No value is displayed in
the PIN check field.
Figure 146. The 3G/LTE modem / PIN / PIN code management page.
To disable the PIN code check, enter the current PIN code in the PIN code field and click the
Disable PIN check button (the button is displayed if the PIN code check is enabled).
To enable the PIN code check, enter the PIN code, used before disabling the check, in the PIN
code field and click the Enable PIN check button (the button is displayed if the PIN code check
is disabled).
To change the PIN code, enable the PIN code check on the 3G/LTE modem / PIN / PIN code
management page and proceed to the 3G/LTE modem / PIN / Changing PIN code page.
Page 188 of 225
Configuring via Web-based Interface