DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
Remote Access to Device
On the Advanced / Remote access to device page, you can configure access to the web-based
interface of the router. By default, the access from external networks to the router is closed. If you
need to allow access to the router from the external network, create relevant rules.
To create a new rule for the IPv4-based network, click the Add button in the Remote access
configuration IPv4 section. In the line displayed, you can specify the following parameters:
Parameter
IP address
Mask
Public port
Protocol
To create a new rule for the IPv6-based network, click the Add button in the Remote access
configuration IPv6 section. In the line displayed, you can specify the following parameters:
Parameter
IP address
Protocol
Figure 134. The Advanced / Remote access to device page.
A host or a subnet to which the rule is applied.
The mask of the subnet.
An external port of the router. You can specify only one port.
The protocol available for remote management of the router.
A host or a subnet to which the rule is applied.
The protocol available for remote management of the router.
Description
Description
Page 171 of 225
Configuring via Web-based Interface