Remote Access To Device - D-Link DIR-825/AC User Manual

DIR-825/AC Wireless AC1200 Dual Band Gigabit Router
with 3G/CDMA/LTE Support and USB Port
User Manual

Remote Access to Device

On the Advanced / Remote access to device page, you can configure access to the web-based
interface of the router. By default, the access from external networks to the router is closed. If you
need to allow access to the router from the external network, create relevant rules.
To create a new rule for the IPv4-based network, click the Add button in the Remote access
configuration IPv4 section. In the line displayed, you can specify the following parameters:
Parameter
IP address
Mask
Public port
Protocol
To create a new rule for the IPv6-based network, click the Add button in the Remote access
configuration IPv6 section. In the line displayed, you can specify the following parameters:
Parameter
IP address
Protocol
After specifying the needed parameters, click the Apply button.
Figure 130. The Advanced / Remote access to device page.
A host or a subnet to which the rule is applied.
The mask of the subnet.
An external port of the router. You can specify only one port.
The protocol available for remote management of the router.
A host or a subnet to which the rule is applied.
The protocol available for remote management of the router.
Description
Description
Page 163 of 220
Configuring via Web-based Interface