Advertisement
Quick Guide of Network Mini Dome Camera
S tep 5: Adjust horizontally and vertically the
camera's pan and tilt for your need
S tep 8: Done
NOTE：
As the lens of camera has already been factory adjusted to the best imaging effect, thus
it only needs to adjust the pan and tilt view angle.
If the image is not clear without the back box, please don't worry, the back box will
affect the imaging effect, so when you test the imaging effect of lens, the back box must
be installed to the camera
S tep 6: Tighten the lens set screws
S tep 7: Install the back box
3
Advertisement
