Connections; Basic Connections (Rs485) - Sanyo VCC-9400P Instruction Manual

CONNECTIONS

Be sure to carefully read the Instruction Manual for all equipment being connected to the camera.
If the connections are incorrect, smoke or operating malfunctions may result.

Basic connections (RS485)

Connecting external alarm sensors
To enable external alarm sensors, connect the supplied alarm input
expansion connector to the alarm input connector, then connect external
switches to suitable lead wires of the expansion connector. When an
intruder triggers the external switch (such as opening and closing a door),
the alarm signal is received and an alarm sounds. See the alarm setting
section for details. (See p45)
English
Power supply cable (AC 24 V, 50 Hz)
Video output connector (BNC)
Camera control
connector (5 pin)
Pin 1 is shown by the arrow
Alarm output
connector (5 pin)
Alarm input Alarm input expansion
connector (10 pin)
connector (10 pin)
Turn off the power for all components before connecting them.
To AC 24 V
TV monitor
(sold separately)
Camera control expansion
connector (5 pin)
( )
Alarm output expansion
connector (5 pin)
( )
( )
– 5 –
System controller
(sold separately)
RS485
GND
A B
Digital video recorder (sold separately)
Buzzer or lamp
Connect an external switch
to an ALARM IN connector