Camera Settings; Camera Setting Item Flow - Sanyo VCC-9400P Instruction Manual

CAMERA SETTINGS

CAMERA SETTING item flow

1
Select CAMERA
ENTER
2
Select CAMERA SETTING
ENTER
(About creating image setting files in VIEW SETTING)
You can set 9 different patterns with view files. Use the
joystick lever (d or c) to change the file number (1) for
VIEW SETTING and press the ENTER button. The selected
image setting file will appear. Neither the mask function nor
the motion detector function can be used with image setting
file "0", so they will not appear as options in the screen for
pattern 0.
Note: If images are at a position other than the preset
position because of manual operations, VIEW
SETTING will automatically switch the image setting
to file "0".
CAMERA SETTING
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
VIEW SETTING 3 ‚
PRESET OFF
MENU BACK
Note:
•
Making any setting while electronic zoom is active will cancel
the electronic zoom condition.
•
If VIEW SETTING has been set to a value from 1 to 8 for the
various preset positions during automatic preset operation,
operation will change automatically to manual operation if you
operate the joystick lever (dcjl), and VIEW SETTING will
also be set to "0".
As a result, be sure to set VIEW SETTING to "0" during manual
operation.
MAIN MENU
LANGUAGE SET
PRESET POSITION SET
CAMERA SET
AUTO MODE PAN
AUTO FLIP OFF
ALARM OFF
FREEZE OFF
REFRESH OFF
STARTING POINT OFF
MENU END
CAMERA SETTING
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
VIEW SETTING 1 ‚
PRESET OFF
MENU BACK
VIEW SETTING 3
IRIS AUTO ‚
WHITE BALANCE ATW ‚
SHUTTER OFF
MOTION OFF
APERTURE ON ‚
GAMMA ON
PRESET OFF
MENU BACK
(Screen for image setting 1 – 8)
VIEW SETTING 0
IRIS AUTO ‚
WHITE BALANCE ATW ‚
SHUTTER OFF
MOTION ---
APERTURE ON ‚
GAMMA ON
PRESET OFF
MENU BACK
(Screen for image setting 0)
Select CAMERA SETTING
A SYNC: (See p15)
Sets camera to internal synchronization (INT) or power source
‚
synchronization (L-L).
‚
‚ Power source synchronization adjusts the vertical synchronization
‚
phase.
L-L SETTING
(V SYNC PHASE)
PRESET
MENU
B PRIVACY MASK: (See p15)
A
This covers an area of the screen with a gray pattern for areas that
B
may infringe on privacy.
C
Gray patterns can be placed on up to 8 areas. However, any single
surveillance screen cannot have more than 4 of the masked areas
D
that have been set. Masked areas cannot be set beyond these
limits.
PRIVACY MASK SETTING
PASSWORD LOCK
PASSWORD CHANGE SET
MASK SET
MENU
C LENS: (See p18)
This lets you make settings such as automatic and manual focus
settings, zoom speed and zoom ratio. In addition, it can also be
used for automatic switching to color images during daytime, or to
black and white images at times of low luminance such as
nighttime.
LENS
FOCUS
ZOOM
DAY/NIGHT
VIEW ANGLE
PRESET
MENU
D VIEW SETTING: (See p27)
Different detailed settings can be made for each camera (9
screens). After they are set, these are linked to "CAMERA
SETTING (0 – 8)" settings for preset positions.
VIEW SETTING 1
IRIS
WHITE BALANCE
SHUTTER
MOTION
APERTURE
GAMMA
PRESET
MENU
– 14 –
0
OFF
BACK
OFF ‚
‚
SET ‚
BACK
MANU ‚
SET ‚
AUTO ‚
OFF
OFF
BACK
VIEW SETTING 0
IRIS
AUTO ‚
WHITE BALANCE
ATW ‚
SHUTTER
OFF
MOTION
OFF
APERTURE
ON ‚
GAMMA
ON
PRESET
MENU
OFF
BACK
AUTO ‚
ATW ‚
OFF
---
ON ‚
ON
OFF
BACK
English