Cday/Night Setting - Sanyo VCC-9400P Instruction Manual

CAMERA SETTINGS
DAY/NIGHT setting
C
This lets you set the filming mode to color mode during times of
normal brightness, or to black & white mode which removes the
infrared filter to increase sensitivity when there is less light. The
three available DAY/NIGHT settings are AUTO, COLOR and B/W.
FOCUS
ZOOM
DAY/NIGHT
VIEW ANGLE
PRESET
MENU
• • • •
AUTO: Automatic mode; The mode switches automatically
between color mode and black & white mode depending on the
luminance of the objects being monitored.
• • • •
COLOR: Color mode; Images are filmed in color regardless of
the luminance of the objects being monitored.
• • • •
B/W: Black & white mode; Images are filmed in black & white
regardless of the luminance of the objects being monitored.
Note:
• • • •
A sound may be heard when the colour image or black and
white image is switched. Also,the image will be distorted as
shown in Fig. 1. This is normal and does not indicate a problem.
• • • •
When using infrared lighting,if there is a strong reflection on the
subject, the optical filter may switch from black and white to
colour mode. Use only enough infrared lighting so that the
mode is not switched.
• • • •
AUTO mode setting
Note:
• • • •
If the backlight conpensation has been set to "MULTI", the
backlight conpensation will be canceled when the mode is
switched to B/W.
• • • •
If "SENSE UP" has been set to "ON", SENSE UP mode will be
activated after the mode switches to B/W mode.
1
In the MAIN MENU, select SET for CAMERA and press the
ENTER button.
The CAMERA SETTING screen will appear.
LENS
MANU ‚
SET ‚
AUTO ‚
OFF
OFF
BACK
(Fig. 1)
2
Use the joystick lever (j or l) to select SET for LENS,
then press the ENTER button.
The LENS screen will appear.
3
Use the joystick lever (j or l) to move the cursor to
DAY/NIGHT, use the joystick lever (d or c) to select the
mode (example: AUTO), and then press the ENTER button.
The D/N SETTING - AUTO screen will appear, and the "+9dB"
setting for "AGC MAX GAIN" will be blinking.
1
Sets the maximum AGC gain.
2
Sets the digital noise reduction.
3
Sets burst suppression. If other peripheral devices (such
as a multiplexer) are connected to the system, bursts
(distortion of image color) can occur when switching
between color and black & white. If this happens, change
the BURST setting to "ON".
4
Sets the focus when switching to black & white mode.
5
Sets the switching level for color mode and black & white
mode. The three available settings are LOW, MID or HIGH.
In addition, the switching level can be set manually (ADJ).
AGC MAX GAIN setting
4
Use the joystick lever (j or l) to move the cursor to
AGC MAX GAIN, and then use the joystick lever (d or c)
to select the gain.
Available settings: Select the maximum AGC gain from
– 22 –
CAMERA SETTING
ENTER
SYNC
PRIVACY MASK
LENS
VIEW SETTING
LENS
PRESET
MENU
FOCUS
ZOOM
DAY/NIGHT
VIEW ANGLE
PRESET
MENU
D/N SETTING - AUTO
ENTER
AGC MAX GAIN
DNR
BURST
FOCUS
LEVEL
PRESET
MENU
D/N SETTING - AUTO
AGC MAX GAIN
DNR
BURST
FOCUS
LEVEL
PRESET
MENU
+9dB, +12dB or +15dB.
INT
SET ‚
SET ‚
1 ‚
OFF
END
MANU ‚
SET ‚
AUTO ‚
OFF
OFF
BACK
1
+9·
2
OFF
3
OFF
4
1
5
MID
OFF
BACK
+9·
OFF
OFF
1
MID
OFF
BACK
English