Sanyo VCC-9400P Instruction Manual page 21

CAMERA SETTINGS
2
Use the joystick lever (d or c) to select AUTO, then
press the ENTER button.
The FOCUS SETTING screen will appear.
ENTER
LIMIT NEAR focus distance setting
3
Use the joystick lever (j or l) to move the cursor to
LIMIT NEAR, then use the joystick lever (d or c) to
change the distance value. (Ex: 3M)
Available settings: 1M (meter), 3M, 5M, 10C (centimeters),
30C, 50C
Note: Focusing becomes difficult when near distance limit is set to
less than "1M".
Setting focus SENSITIVITY
4
Use the joystick lever (j or l) to move the cursor to
SENSITIVITY, then use the joystick lever (d or c) to
change the setting. (Ex: LOW)
Available settings:
•
HIGH: High sensitivity focusing
•
LOW: Low sensitivity focusing
Note: When focus SENSITIVITY is set to HIGH, it may react to
even slight movements of the target object. In this case,
change the setting to LOW.
LENS
FOCUS AUTO ‚
ZOOM SET ‚
FOCUS SETTING
PRESET OFF
MENU BACK
LIMIT NEAR 1M
SENSITIVITY HIGH
AREA SET ‚
PRESET OFF
MENU BACK
FOCUS SETTING
LIMIT NEAR 3M
SENSITIVITY HIGH
AREA SET ‚
FOCUS SETTING
LIMIT NEAR 3M
SENSITIVITY LOW
AREA SET ‚
5
Use the joystick lever (j or l) to move the cursor to SET
for AREA, and press the ENTER button.
The AREA SETTING screen for AREA 2 (initial setting) will
appear to allow setting of focus target area.
6
Use the joystick lever (d or c) to select the focus target
area. (Ex: 3)
The focus target area will become narrow.
Available settings: 1/full screen, 2/center of screen,
4
Canceling a settings screen
•
Use the joystick lever (l) to select BACK for MENU, then
press the ENTER button. The FOCUS SETTING screen
will reappear.
•
To return to the normal screen, use the joystick lever (l
c) to select END for MENU, then press the ENTER button.
– 20 –
FOCUS SETTING
ENTER
LIMIT NEAR
SENSITIVITY
AREA
AREA SETTING
PRESET
MENU
AREA
PRESET
MENU
AREA SETTING
AREA
PRESET
MENU
3/smaller center
3M
LOW
SET ‚
OFF
BACK
2
OFF
BACK
3
OFF
BACK
English