E Profile Compensation Setting (Aperture); Fgamma Correction Setting - Sanyo VCC-9400P Instruction Manual

CAMERA SETTINGS
Profile compensation setting (APERTURE)
E
Set this function to further emphasize the profile of the target
object. The amount of compensation can be adjusted for horizontal
or vertical directions.
1
In the MAIN MENU, select SET for CAMERA and press the
ENTER button.
The CAMERA SETTING screen will appear.
2
Use the joystick lever (j or l) to move the cursor to
VIEW SETTING, then press the ENTER button. (Ex: 1)
The VIEW SETTING 1 screen will appear.
ENTER
3
Use the joystick lever (j or l) to move the cursor to
APERTURE and then use the joystick lever (d or c) to
select ON. Then press the ENTER button.
The APERTURE SETTING screen will appear and the "H"
value will be blinking.
ENTER
4
Select the amount of profile compensation
Available settings: 1 – 15 (Compensation intensity)
1
Set the horizontal profile compensation
Use the joystick lever (d or c) to adjust the value for "H"
(horizontal).
2
Set the vertical profile compensation
Use the joystick lever (j or l) to move the cursor to "V"
(vertical), then use the joystick lever (d or c) to adjust the
value for "V".
5
Canceling a settings screen
•
Use the joystick lever (l) to select BACK for MENU, then
press the ENTER button. The VIEW SETTING 1 screen
will reappear.
•
To return to the normal screen, use the joystick lever (l
c) to select END for MENU, then press the ENTER button.
English
CAMERA SETTING
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
VIEW SETTING 1 ‚
VIEW SETTING 1
IRIS AUTO ‚
WHITE BALANCE ATW ‚
SHUTTER OFF
MOTION OFF
APERTURE ON ‚
AGC ON ‚
GAMMA ON
PRESET OFF
MENU BACK
APERTURE SETTING
H 8
V 8
GAMMA correction setting
F
In addition to turning gamma correction ON or OFF, contrast
sensitivity can be boosted at 2 levels.
1
In the MAIN MENU, select SET for CAMERA and press the
ENTER button.
The CAMERA SETTING screen will appear.
2
Use the joystick lever (j or l) to move the cursor to
VIEW SETTING, then press the ENTER button. (Ex: 1)
The VIEW SETTING 1 screen will appear.
3
Use the joystick lever (j or l) to move the cursor to ON
for GAMMA, then use the joystick lever (d or c) to select
the gamma correction.
Available settings:
•
OFF: No gamma correction
•
ON: Gamma correction (γ = 0.45)
•
SMART 1: Correction 1
•
SMART 2: Correction 2 (improves contrast for dark
Note: When using SMART 1 or SMART 2, the target object may be
too bright, so determine which setting is better for the target
object.
4
Canceling a settings screen
•
Use the joystick lever (l) to select BACK for MENU, then
press the ENTER button. The CAMERA SETTING screen
will reappear.
•
To return to the normal screen, use the joystick lever (l
c) to select END for MENU, then press the ENTER button.
– 39 –
CAMERA SETTING
ENTER
SYNC
PRIVACY MASK
LENS
VIEW SETTING
PRESET
MENU
VIEW SETTING 1
IRIS
WHITE BALANCE
SHUTTER
MOTION
APERTURE
GAMMA
PRESET
MENU
locations)
INT
SET ‚
SET ‚
1 ‚
OFF
BACK
AUTO ‚
ATW ‚
OFF
OFF
ON ‚
ON
OFF
BACK