Ip Camera Recording Setup - American Dynamics Hybrid Digital Video Recorder User Manual

IP Camera Recording Setup

Once IP cameras have been added to the server you can enable recording, set the recording resolution
and recording frame rate measured in images per second (IPS). Each IP camera can be individually
set.
The Camera Recording Setup screen is where you enable cameras to record video, set the recording
resolution and set the image per second (IPS) recording rate.
The Camera Input column is the physical input connect that the camera is connected to on the back of
the HDVR. Refer to the Back Panel Layout.
If a camera has been connected to a HDVR system and the camera is producing a video signal, the
HDVR client application will automatically detect the video signal. If a video signal is detected it is
indicated with a green "YES" under the Video Detection column and by default the Record Enabled
column check box for that camera is checked. To disable recording uncheck the enable check box.
The HDVR systems by default are setup to record in CIF resolution if a video signal is detected.
You can change individual camera resolutions by clicking on the Record Resolution drop down box
and selecting one of the resolutions listed. Your options will vary based on the camera manufacturer
and model.
Once you have made the change you must click the Apply button to make the change.
95