Table of Contents
Advertisement
B. Click Change and type a computer name that is unique to all computers recognized by the
Active Directory server.
C. Select Domain, enter the Active Directory domain, and click OK. For example, a valid
domain entry might be "HDVR.test.com" (not "HDVRTEST").
D. When prompted, enter a username and password for a domain account with the right to
add computers to the domain.
E. Restart the system when prompted.
9. When the login screen appears after the system restarts, notice that the drop-down list contains the
Active Directory domain. Select the domain and log in.
10. Open a command prompt and use ipconfig to ensure that the hostname and primary DNS suffix are
correct.
11. Note the fully qualified host name (hostname.primary-dns-suffix) and IP address of the HDVR
server computer that you will connect to, the Active Directory domain, and the fully qualified host
name and IP address of the Active Directory server. For example:
hdvrserver.hdvr.test.com
hdvr.test.com
adserver2008.hdvr.test.com
12. If installing an HDVR server, add a service principal name on the Active Directory server for the
HDVR server. To do this, open a command prompt (right-click to run as an Administrator if
necessary) on the Active Directory server and execute the following command, substituting the
name and fully qualified hostname of your HDVR Server:
setspn –A HDVR/hdvrserver.hdvr.test.com hdvrserver
NOTE:
All text after the forward slash should be lower case, and "HDVR" must be upper case.
13. On the HDVR server or client computer, download and install the HDVR software from
www.americandynamics.net. You must be logged in with Local Administrator privileges to do this.
The software automatically starts after the installation is complete.
14. If installing an HDVR server, license the HDVR server as an Enterprise system. To do this,
complete the following steps:
A. Install the HDVR Client software on the server if it is not already installed.
B. Run the HDVR Client and connect to the local server (127.0.0.1) using the default "admin"
account.
C. Open the System Setup page for the HDVR server you want to license and select the
System tab.
D. Enter the valid Enterprise license as generated by American Dynamics and click Apply in
the License section.
192.168.1.16
192.168.1.70
153
Advertisement
Table of Contents
