Table of Contents
Advertisement
Left Click, hold and drag the cursor over the area of the grid you want to mask. A green
rectangle will mark the masked area.
Click the Apply button and the yellow grid and green rectangle will disappear and the green
rectangle will be replaced by a solid gray rectangle.
This area is now masked from both live and recorded video. To clear the mask, click the Clear
button.
10. The Video Settings slider controls are used to adjust the image on your screen. The system
defaults to 50% for Brightness, Contrast, Saturation, and Hue. The Sharpness is set to 100%.
You can easily reset to the system defaults by clicking the Defaults button.
Clicking the Defaults button will clear any video masks you have created AND reset all of the
Video Settings to the default settings.
107
Advertisement
Table of Contents
