American Dynamics Hybrid Digital Video Recorder User Manual page 82

NOTE:
If your joystick has a Point of View source, you can switch your joystick functionality to the POV by
selecting the POV radio button in the Position Control Source box.
The Zoom Controls box allows you to adjust the zoom features on your camera.
The camera or camera view can be zoomed in or out by twisting the joystick to the right or left. The
zoom status is reflected by the green highlight as shown in the picture above. You can configure the
joystick to zoom in by twisting the joystick to the right or left, depending on your personal preference.
When the Invert Rudder checkbox is selected, the camera will zoom in by twisting the joystick to the left
and zoom out when it is twisted to the right. Deselecting the Invert Rudder checkbox will reverse the
zoom control.
The Sensitivity slide bar allows you to adjust the sensitivity of the twisting motion required to zoom the
camera.
NOTE:
If your joystick has a rudder, you can switch the zoom functionality to the rudder by selecting the
Rudder radio button in the Zoom Control Source box.
82
Hybrid Digital Video Recorder