Once you have made the change you must click the Apply button to make the change.
The second method is by clicking on the D1, 2CIF or CIF optimize buttons on the bottom of the screen,
which will change all detected cameras equally for that setting.
Once you have made the change you must click the Apply button to make the change.
Camera Setup
The Camera Setup screen is where you configure the individual camera settings such as camera
name, video settings, recording quality and motion and video masks.
1. Click on one of the cameras in the camera tree to select the video source to display.
2. Move your cursor to the Name field and enter a new camera name then click Apply to make the
change. You will see the new camera name in the Camera tree and Camera Information box
(12).
102
Hybrid Digital Video Recorder