American Dynamics Hybrid Digital Video Recorder User Manual page 40

If you configured your profile as an Event Monitoring mode, the Event Monitor Box will appear just
below this panel. You can move it and resize it as you need. Once a video event takes place, it will be
automatically listed in the box.
Clicking on the event line will switch the video to that camera.
Clicking on the small blue rewind button will replay the event as it was tripped.
Clicking the small red 'X' acknowledges the event and removes it from the list.
If you configured your profile in Virtual Matrix Mode, you will not see an Event Monitor box as motion
triggers recording. Instead, it automatically switches between cameras and pops them into the frame as
motion occurs.
NOTE:
For details on how to configure an Event Monitor profile refer to the Setup section of the manual.
40
Hybrid Digital Video Recorder