Bluetooth Module - HP EliteBook 8530p Maintenance And Service Manual

Bluetooth module

NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth
module cable is included in the Cable Kit, spare part number 495064-001. See
for more Cable Kit spare part number information.
Description
For use in all countries and regions except Japan and Asia Pacific countries and regions
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the hard drive (see
Remove the Bluetooth module:
1. Position the computer upside-down with the rear toward you.
2. Remove the Bluetooth cover by lifting it straight up (1) and off the computer as far as the cable
connected to the module will allow.
NOTE:
3. Remove the Bluetooth module from the clip in the cover by sliding it straight down and out of the
cover (2).
4. Disconnect the Bluetooth module cable (3) from the Bluetooth module.
52 Chapter 4 Removal and replacement procedures
Battery on page
Hard drive on page
The Bluetooth module is housed in the cover.
43).
49).
Cable Kit on page 27
Spare part number
483113-001