3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Disconnect the wireless antenna cables from the WLAN module (see
and the WWAN module (see
6.
Remove the following components:
a.
Keyboard (see
b.
Switch cover (see
Remove the display assembly:
1.
Position the computer right-side up with the front toward you.
2.
Disconnect the display panel cable (1) from the system board.
3.
Remove the wireless antenna cables from the clips (2) and (3) and routing channels (4) built into
the top cover.
4.
Position the computer upside-down with the rear toward you.
68
Chapter 4 Removal and replacement procedures
Battery on page
43).
WWAN module on page
Keyboard on page
59)
Switch cover on page
57).
64)
WLAN module on page
63)