4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Switch cover (see
e.
Display assembly (see
f.
Top cover (see
g.
Fan (see
Fan on page
h.
Heat sink (see
i.
Modem module (see
j.
System board (see
Remove the ExpressCard assembly:
1.
Turn the system board upside-down, with the front toward you.
2.
Remove the four Phillips PM2.0×5.0 screws that secure the ExpressCard assembly to the system
board.
3.
Detach the slots on the ExpressCard assembly from the tabs on the ExpressCard connector (1).
Battery on page
43).
Hard drive on page
49)
Optical drive on page
Keyboard on page
59)
Switch cover on page
Display assembly on page
Top cover on page
73)
78)
Heat sink on page
80)
Modem module on page
System board on page
45)
64)
67)
62)
87)
Component replacement procedures
91