Fan - HP EliteBook 8530p Maintenance And Service Manual

Fan

Description
For use with HP EliteBook 8530p computer models or HP EliteBook 8530w computer models
For use with HP EliteBook 8530w computer models with Intel QX9300 Quad Core processor
Before removing the fan, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Switch cover (see
e. Display assembly (see
f. Top cover (see
Remove the fan:
1. Position the computer right-side up, with the front toward you.
2. Disconnect the fan cable (1) from the system board.
3. Remove the two Torx 8M2.5x7.0 screws (2) that secure the fan to the base enclosure.
4. Lift the front edge of the fan to remove it from (3) from the base enclosure.
78 Chapter 4 Removal and replacement procedures
Battery on page 43).
Hard drive on page 49)
Optical drive on page
Keyboard on page 59)
Switch cover on page
Display assembly on page
Top cover on page 73)
45)
64)
67)
Spare part number
495079-001
495080-001