Page 2
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES: Inspect equipment before each workout. Check that all nuts, bolts, screws and pop pins are in place and fully tightened. Also, before use, check cables for sign of wear. Replace all worn parts immediately.
Retain this Owner’s Manual for damaged the equipment furture reference. Part numbers • Assemble and operate the PCH-24X on a solid, level are required when ordering parts. surface. Locate the unit a few feet from the walls or furniture to provide easy access.
The bottles that are marked “Poison” is your touch up paint. Keep away from children. Set up the PCH-24X on a solid, fl at surface. A smooth, fl at surface under the machine helps keep it level. : Obtain assistance! If you feel like you can’t assemble the PCH-24X by yourself then do Provide ample space around the machine.
PCH-24X HARDWARE ILLUSTRATION Part #1 M10X70mm hex head bolt Qty. 4 Part #2 5/16”X1.5” hex head bolt Qty. 4 Part #3 M10X65mm hex head bolt Qty. 6 Part #4 M8X15mm hex head bolt Qty. 1 Part #5 M10 nylon lock nut...
Page 8
PCH-24X HARDWARE ILLUSTRATION CONT. Part #6 M10 washer Qty. 16 Part #7 5/16” washer Qty. 4 Part #8 5/16” spring washer Qty. 4 Part #9 2”X2” foot cap Qty. 4 Part #10 1”X2” end cap Qty. 4...
Page 9
PCH-24X HARDWARE ILLUSTRATION CONT. ø1” round end cap Part #11 Qty. 2 ø1”X130L rubber grip Part #12 Qty. 2 Part #13 2”X2” end cap Qty. 1 Part #14 50X60mm nylon bushing Qty. 2 ø4”X6” foam roller Part #15 Qty. 2...
PCH-24X PART LIST Part A Part B Part C mainframe base grip frame [1pcs] [2pcs] [1pcs] Part D Part E Part F left frame right frame mid-support [1pcs] [1pcs] [1pcs] Part G Part H roller adjuster [1pcs] [2pcs]...
PCH-24X STEP 1 BE CAREFUL TO ASSEMBLE ALL COMPONENTS IN THE SEQUENCE THAT THEY ARE PRESENTED. NOTE: finger tighten all hardware in this step. DO NOT wrench tighten until the last step. some components may be pre-assembled. nylon lock nuts will not fully screw onto bolts, must wrench tighten.
Page 14
PCH-24X STEP 2 BE CAREFUL TO ASSEMBLE ALL COMPONENTS IN THE SEQUENCE THAT THEY ARE PRESENTED. NOTE: finger tighten all hardware in this step. DO NOT wrench tighten until the last step. some components may be pre-assembled. nylon lock nuts will not fully screw onto bolts, must wrench tighten.
Page 16
PCH-24X STEP 3 BE CAREFUL TO ASSEMBLE ALL COMPONENTS IN THE SEQUENCE THAT THEY ARE PRESENTED. NOTE: finger tighten all hardware in this step. DO NOT wrench tighten until the last step. some components may be pre-assembled. nylon lock nuts will not fully screw onto bolts, must wrench tighten.
Page 18
PCH-24X STEP 4 BE CAREFUL TO ASSEMBLE ALL COMPONENTS IN THE SEQUENCE THAT THEY ARE PRESENTED. NOTE: finger tighten all hardware in this step. DO NOT wrench tighten until the last step. some components may be pre-assembled. nylon lock nuts will not fully screw onto bolts, must wrench tighten.
PCH-24X please write your serial number in the boxes below S/N # Body-Solid ® Built for Life 1900 S. Des Plaines Ave. Forest Park, IL 60130 Phone:(708)427-3555 Fax:(708)427-3556 Hours: M-F 8:30 - 5:00 CST www.bodysolid.com Copyright 2011. Body-Solid. All rights reserved. Body-Solid reserves the right to change design and speci cations when we feel it will improve the product.