Mail Box Functions
Storing Originals in an Inbox
There are several ways to store image data in an inbox. This section describes the procedure for scanning originals
placed in the feeder or on the platen glass. For more information on the settings, see the references in each procedure.
Preparations
Inbox Selection Screen
Press [Mail Box] to switch to the Mail Box
function.
If a screen prompting you to enter a department
ID and password is displayed, enter the ID and
password, and press
If Department ID Management or the SSO-H login
service is set, it is necessary to enter and ID and
password. (If an optional card reader is attached,
insert a control card.)
For more information, see e-Manual > Basic
Operations.
What is the Mail Box Function?
The Mail Box function is a function that
enables you to temporarily store originals
scanned using the machine and data sent
from a computer. Documents (data) stored in
inboxes can be printed or sent when required.
39
(ID) on the control panel.
Place Your Originals
Placed in the feeder
Placed on the platen glass
Place your originals.
If you have placed your originals on the platen
glass, close the feeder/platen cover after placing
your originals.
NETWORK
Print
Send