devention Scout X4 Quick Start Manual And Systems Flowchart page 6

Model ( is the nose direction) Mode 2 Mode 1
ROLL (lean)
Left / right
YAW (turn)
Left / right
THROTTLE
Up/down
PITCH
Forward/backward
Scout X4 nose move up/down
0 it
0 Tr
—1/11.
411I
o.-1111.
AUTO Take Off
You should have
triple blink = 8sats
for this feature.
ARM/UNLOCK motors
in manual mode
411I
Ground
MIX Switch move throttle
to "0" down
MIX switch
to "1" position
RUDD D/R switch
to "1" position
0
•
2
MIX
0
•
MIX
2
• 0'
V I
RUDD D/R
410' •
'0
aliesw
ammo.o.
GPS hold mode
You can fly in this mode simply
move the controls when you lei
of the control, the Scout X4 will
NOTE: You must CENTER the
throttle stick for altitude hold
Ground
MIX switch
to "1" position
Throttle stick
return neutral
DO NOT switch to manual before
landing it is safer to land in GPS
hold mode. swtich to manual
AFTER landing to lock motors
/---
,
tit
\
os,
ROUND FLY mode
This mode is used for
making circles around
a object of interest.
RADIUS is set in the
F12E menu by adjusting
Position 2 value for AUX3
MIX switch Move FMOD switch to "2" Move FMOD switch to "0"
to "1" position The Round Fly will start The Round Fly will stop
0
•
2
'C FMOD
'FMOD 0
•
2
s. MIX
MIX
You can stop RTH by switching to
GPS hold MAKE SURE the throttle
stick is set to 50% when switching.
NEVER switch to MANUAL from
RTH, this can cause a crash.
MIX
2
Throttle stick
return neutral
411I
1111.
Ground
RETURN TO HOME
Activating this feature will
casue the Scout X4 to climb
to 15m at this height it will fly
to the starting location and
proceed to land.
MIX switch
to "2" position
10.0 Operation Instruction
• 5 •